HiRA Wiki

e14009 to-do list:

1. Test dE PA box
   • How will the biases get from ISEG to PA tower → 4 cables made by WU (1/9/17)
2. Zero degree detector
   • Build mount (UCONN)(1/11/17)
   • Build detector/Lead (WU) (1/9/17)
   • Modify copper mouth piece (WU)
3. Disassemble HiRA Array (Kyle/Pierre/Sean S 1/4)
   • Install 14 dE detectors (Kyle/Pierre 1/4-1/6)
4. Reassemble Array (Pierre/Sean S 1/6-1/7)
5. Install dE PA box (Sean/Juan 1/6)
6. Test dE's?
   • Add HINP3 to DAQ (Kyle 1/7-1/8)
   • Test HINP3 MB with pulsers (Kyle 1/7-1/8)
   • Test bias distribution with new cables (1/9)
   • Hunt noise
7. Install mount for zero degree detector (1/11 -1/14)
8. Retest Si E and CsI electronics with pulsers/cosmics (1/16)
9. Alter trigger logic (Trigger will be either EF and EB or EF and EB and Zero Degree)

Possible Travel days

• Alan 1/11-1/18, 2/3
• Sean/Dan 1/9-1/13

Other items - added 1/17 Implement dE bias for all detectors, test and calibrate dEs Install 0deg detector, internal cabling Setup QDC, test - modify readout and other code to accommodate Install Cu beam blocks - test all Install targets Install beam-pipe section