HiRA Wiki

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

e14009 to-do list:

  - Test dE PA box
    * How will the biases get from ISEG to PA tower -> 4 cables made by WU (1/9/17)
  - Zero degree detector
    * Build mount (UCONN)(1/11/17)
    * Build detector/Lead (WU) (1/9/17)
    * Modify copper mouth piece (WU) 
  - Disassemble HiRA Array (Kyle/Pierre/Sean S 1/4)
    * Install 14 dE detectors (Kyle/Pierre 1/4-1/6)
  - Reassemble Array (Pierre/Sean S 1/6-1/7)
  - Install dE PA box (Sean/Juan 1/6)
  - Test dE's?
    * Add HINP3 to DAQ (Kyle 1/7-1/8)
    * Test HINP3 MB with pulsers (Kyle 1/7-1/8)
    * Test bias distribution with new cables (1/9)
    * Hunt noise 
  - Install mount for zero degree detector (1/11 -1/14)
  - Retest Si E and CsI electronics with pulsers/cosmics (1/16)
  - Alter trigger logic (Trigger will be either EF and EB or EF and EB and Zero Degree)


Possible Travel days
  * Alan 1/11-1/18, 2/3
  * Sean/Dan 1/9-1/13

Other items - added 1/17
Implement dE bias for all detectors, test and calibrate dEs
Install 0deg detector, internal cabling
Setup QDC, test - modify readout and other code to accommodate
Install Cu beam blocks - test all
Install targets
Install beam-pipe section

HiRA Wiki

User Tools

Site Tools

Page Tools