(Only to be done by Dirk)

/global/data1x/gretina: drwxrwxr-x 64 gretina users 4096 Sep 19 2011 CR-1 drwxrwxr-x 528 gretina users 20480 Oct 4 2011 CR-2 drwxrwxr-x 264 gretina users 12288 Oct 26 2011 CR-3 drwxrwxr-x 182 gretina users 8192 Dec 3 2011 CR-4 drwxrwxr-x 12 gretina users 4096 Nov 16 2011 CR-5 drwxrwxr-x 200 gretina users 8192 Mar 5 20:22 CR-8 drwxrwxr-x 162 gretina users 8192 Oct 14 2011 ER-2 drwxrwxr-x 141 gretina users 8192 Aug 24 2011 ER-3 drwxrwxr-x 124 gretina users 4096 May 31 2011 ER-4 drwxrwxr-x 180 gretina users 8192 Jul 11 2011 ER-5 drwxrwxr-x 72 gretina users 4096 Dec 15 12:03 ER-6

/global/data1a/gretina/Rm134Mar12: get confirmation from Heather

 Here offline decomp data gets stored:
  /global/data1a/gretina/user1
  /global/data1a/gretina/user2
  /global/data1a/gretina/user2_1
  /global/data1a/gretina/user4

Channels:

• Q4P2ε1 - grounded in the detector
• Q6P2ε3 - FET/preamp broken
• Q7P3φ5 - gain 1/10 - broken wire or bad contact in the detector - to be further tested

Radial boxes:

• SN 005207 - over current
• SN 005222 - over current

Spares available: 3

Digitizers:

• SN 067h - errors on bits 9 and 10 with rate >100 kHz
• SN 02Eh - errors on bit 12 with rate ~4 kHz
• SN 097h - the card is blowing the fuse for the 5V

Spares available: 1 (blue)

The configuration for the decomposition is here: https://wikihost.nscl.msu.edu/gretina/doku.php/daq:decomp

When a position of a detector is changed the following has to be updated:

• CS_DataId in https://wikihost.nscl.msu.edu/gretina/doku.php/daq:decomp
• CS_GblId in /global/boot/vmeArray/vme*.cmd — The Id is given by hole_number * 16 + position_in_quad * 4 + board_number
• GTSort_shack/DetNum.dat — self explanatory