skip to content

AT-TPC Wiki

User Tools

Log In

Site Tools

Recent Changes
Media Manager
Sitemap

Trace: • actar_collaboration_meeting_bordeaux_june_16_-_18 • organizational_meeting_4_22_2009 • cobo_meeting_september_25_2008 • actar_collaboration_meeting_bordeaux_june_16_-_18_2008 • flammable_gas_safety_meeting_4_30_2009 • get_technical_workshop_meeting_bordeaux_november_18-19_2009 • dokuwiki

xmd

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== XMD setup ======
We will use XMD to program the FPGA and run the embedded software on the PPC core.

On Fedora and Ubuntu, you have to install 3rd party Xilinx USB cable drivers, [[http://rmdir.de/~michael/xilinx/|link]].
  * Download {{:xmd.ini.txt|:xmd.ini}} and save it in your xmd runtime directory e.g. $HOME/dev/xmd 
  * Load Xilinx environment e.g. ''source /opt/Xilinx/14.5/ISE_DS/settings32.sh''
  * run xmd just type ''xmd''

Once in XMD prompt type
<code>
fpga -f system.bit
connect ppc hw
dow simpleImage.virtex440-cobo02_nfs.elf
run
</code>

''system.bit'' is the FPGA's bitstream.
''simpleImage.virtex440-cobo02_nfs.elf'' is the ELF image we are trying to run on the PowerPC core.

xmd.txt · Last modified: 2013/09/04 10:53 by abunimeh

Page Tools

Show page
Old revisions
Backlinks
Back to top

Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International