Differences

This shows you the differences between two versions of the page.

--- cobo_frontpanel [2014/05/20 12:41] – created abunimeh
+++ cobo_frontpanel [2014/05/22 10:58] (current) – abunimeh
@@ Line 1: / Line 1: @@
+====== CoBo Front Panel ======
-  * 2 Dual VHDCI Connectors (LVDS,LVCMOS3.3V)
-  * 2 Dual LEMO Connectors (LVCMOS 3.3V/TTL 5V)
+  * 2 Dual VHDCI Connectors (LVDS,LVCMOS3.3V) (compatible cable [[http://www.cablesondemand.com/category/CSVHDCI/product/CS-VHDCIMX200/URvars/Items/Library/InfoManage/CS-VHDCIMX200.htm|Amphenol CS-VHDCIMX200-003]])
-  * 1 Micro-USB (USB UART)
+  * 2 Dual LEMO Connectors (LVCMOS 3.3V/TTL 5V) [[http://intra.lemo.ch/PartSearch?part=EPY.00.250.NTN|LEMO EPY.00.250.NTN.]]
-  * 4x4 LEDS
+  * 1 Micro-USB (USB UART) (compatible cable [[http://www.digikey.com/product-search/en?vendor=0&keywords=WM17145-ND|Molex 0687840001]])
+  * 4x4 LEDS (X0 LEDs are for Asad0, X1 LEDs are for Asad1, etc)
     * P = Asad **P**lugged
+      * ON: Asad plugged in
+      * OFF: No Asad plugged
+      * Slow Blink: (configuration dependent?)
+      * Fast Blink: ?
     * B = **B**ad
-    * U = CoBo-Asad **U**pload Activity
+      * ON: Major error. Typically needs user intervention. Power supply error? unresponsive to slow control or reset.
-    * D = CoBo-Asad **D**ownload Activity
+      * OFF: no errors
+      * Slow Blink: Slow control errors e.g. AGET controller busy, etc.
+      * Fast Blink: bad data frames.
+    * U = CoBo-Asad **U**plink activity i.e. from CoBo to Asad
+      * ON: ?
+      * OFF: no activity
+      * Slow Blink: minor traffic
+      * Fast Blink: major traffic
+    * D = CoBo-Asad **D**ownlink activity i.e. from Asad to CoBo
+      * ON: All or 3 Asads sending data
+      * OFF: no data from asad
+      * Slow Blink: slow control replies
+      * Fast Blink: 2 or less Asads sending data
   * 3 MicroTCA LEDS
     * Blue = Hot swap
@@ Line 14: / Line 32: @@
-CoBo 0.2v
+====== CoBo 0.2v (Prototype) ======
-{{ ::cobo_fp02.png |}}
+{{ ::cobo_fp02.png?500 |}}
+====== CoBo 1.0v (Production) ======
-CoBo 1.0v:
 The difference between the two front panels is the arragement of LEMO connectors
-{{ ::cobo_fp10.png |}}
+{{ ::cobo_fp10.png?500 |}}
+====== CoBo 0.2v Front Panel (Prototype) ======
+{{ ::cobo02_2.png?500 |}}