mount design: need to standardize the design for both MCP mounts. Design an Al housing around the MCP detectors.

Screws should be the right size to install with non-magnetic allen wrenches. Also, screws should be of consistent size

Switch amplifiers (green)

Design better ground: either include in PC board or provide an additional ground plane.

update MCP database

Need target ladder in G10 frame shape with non-magnetic heli-coils

Need better alignment to the target drive (dowel pin?)

use screws that fit to non-magnetic allen wrenches

redesign drive, deal with wearing out of brass gear, etc.

MCP0 drive needs to take into account the 3mm offset

Need a jig to do quick test of Si detectors

Redesign the CsI gold cables

Redesign the cable stress release mounts, stand-off on the inspect channel splitter/attenuators

Redesign CsI pulser box to allow access to switch and cabling

Does the CsI board to what we need?

order new chipboards plus spares

consider have DE chipboards inside chamber (need power cables)

Need more space from detectors to motherboards?

Need to build faraday cage in each tower so that cable connections aer not disturbed

Fix individual telescopes broken parts, dowel pins, and get spare parts

Fix shorting power cables

Need more reshapers and 16 channel NIM discriminators

Check MCP QDC channels

Need new or fixed scalers

Partial bias tests of MCPs and Sis at air before pumping

document setup and test proceedures

run TDC as common start

Modify Spectcl so that it is remotely usable for trivial things