Differences

This shows you the differences between two versions of the page.

--- detectors:wupabox [2012/02/17 11:13]
chajecki created
+++ detectors:wupabox [2012/02/17 12:33] (current)
chajecki
@@ Line 1: / Line 1: @@
+Lee Sobotka: "Our PA box has its own mother boards which penetrate the vacuum. (There is NO cable on the outside from mother board and vacuum interface.)  Our design cannot use your existing mother boards.
+I will dig up the design and you can see how to modify it for your existing boards. There will also be a problem on the output. We use two standard 50 ohm shielded cable to go from the PA to the amps. (This PA tower was intended to be used with the PICO shapers/disc.) If you want to use with HiRA, one has to Tee two outputs together as the CB's are 32 channel inputs.  (You cannot run unshielded cable outside the chamber.)"
+---------------------------
 {{:detectors:wuexp_019.jpg|}}
+---------------------------
+---------------------------
 {{:detectors:funnel_part1.jpg|}}
-{{:detectors:funnel_part2-0.jpg|}}
+---------------------------
+---------------------------
+{{:detectors:funnel_part2_dragged_.jpg|}}
+{{:detectors:funnel_part2_dragged_1.jpg|}}
+---------------------------
 {{:detectors:feedthrough.jpg|}}
-{{:detectors:feedthrough2.jpg|}}
+---------------------------
+{{:detectors:feedthrough2.jpg|}}

HiRA Wiki