Differences

This shows you the differences between two versions of the page.

--- resources:poster_printing_instructions [2010/12/07 17:46]
ratkiewi created
+++ resources:poster_printing_instructions [2024/08/23 12:48] (current)
dopfer
@@ Line 1: / Line 1: @@
-====== Printing Instructions =====
+====== Posters =====
-  * If these instructions don't work, contact helpme. Then tell me why they don't work.
-  * use nuclear-plot, go to print > properties > paper/quality > paper size > ANSI E
-  * Then click print.
-  * Apparently sometimes windows will say that the job failed to print, but this isn't necessarily true and it's important to check the printer before you believe the error message.
-  * Nuclear plot is in the mini-theory library across from Zelevinsky's office.
+===== Poster Template, Logos, Talk Template =====
+Most up-to-date templates are linked [[https://portal.frib.msu.edu/sites/communications/SitePages/Home.aspx|here]]. Poster templates are under "Templates", then "Communication Templates". \\
+If you do not yet have access to the FRIB portal, please contact: [[helpme@frib.msu.edu]]\\
+The FRIB logos are also available in the portal at [[https://portal.frib.msu.edu/sites/communications/Standard%20Graphics/Forms/Thumbnails.aspx | this page]]. This site has most logos that may be needed, as well as maps of the lab.
+===== Poster Printing Instructions =====
+These instructions apply only to the lab's Windows desktop machines. Contact helpme if something goes wrong. There are two poster printers, one on the second floor (room 2040 - mini-Theory Library) and one on the fourth, by the elevator.
+  - Open the prepared PowerPoint file. Check that the file is set for 40 x 32 inches, this can be found under "Design" > "Slide Size" > "Custom Slide Size". :!::!: IT IS RECOMMENDED TO DO THIS BEFORE STARTING YOUR POSTER, AS THINGS MAY SHIFT AROUND ON THE SLIDE IF YOU DO THIS STEP AFTER LAYING OUT ALL YOUR TEXT AND FIGURES :!::!:
+  - It is recommended to run a scaled test-print on a standard printer before printing on the plotting printer.
+  - Check that there is enough of the correct paper on the plotter and that ink levels are okay. Email helpme to have paper type changed or more paper/ink installed.
+  - Choose the printer "Nuclear-Plot on WINPRINT" for the second floor printer or "4100-Plot on WINPRINT" for the fourth floor printer.
+  - Go to Print > Properties.
+  - Printer quality is automatically set to "Speed", change it to "Quality" to avoid lines on the poster.
+  - Set paper size using "Paper Options" > "Document size" > "ANSI E". (If your poster is not 40 x 32 you may need to find what the correct paper size is for your poster) Hit "Ok" to close pop-up windows.
+  - Under "Settings", for "Full page slides" uncheck "Scale to fit paper".
+  - Print your poster!
+Windows may sometimes say that the job failed to print, but this isn't necessarily true and it's important to check the printer before you believe the error message.

FRIB Graduate Student Wiki

User Tools

Site Tools

Differences

Page Tools