Check the MPS Device Configuration Guideline for power limits and special notes

Calculate beam power with the physics calculator

Configure chopper

Set beam inhibit mode

Send beam

Link/ Explanation to MPS DEvice Configuration guideline could be helpful, long term this also should be acquird info

phys calc isn't really necessary with the beam power calc on MPS operator, worth a mention and probably easier to use for newer operator

Also the importance of double checking Energy and Stripping eff especially would be a good tip

note that cw is 100hz, 9950us

wouldn't include cavitiy monitoring, AP normally asks for this and immediately wants it done so it can be done in the moment without any surprise, also this opens the can of worms on how to accomplish this without explaining it

Limiting Primary Beam Power → This operator page has a lot of important information about the devices involved and how they work

Using the Physics Calculator

FRIB MPS Device Configuration Guideline