Differences

This shows you the differences between two versions of the page.

--- task:srf_trips [2024/10/02 09:45] – Adding instructions harvey
+++ task:srf_trips [2024/10/27 10:14] (current) – changed header level pirkola
@@ Line 3: / Line 3: @@
   - Determine which cavity has tripped
     - MPS failed device dialogue box
-    - RF main page or any status page
+    - RF main page or any cavity status page
   - Navigate to the LLRF interlock detail page
-  - If any of the following interlocks are present do not reset the latch or the cavity, skip directly to last step
+  - If any of the following interlocks are present do not reset the latch or the cavity, skip directly to last step. See image below
     - PLC
     - Spark Detectors
@@ Line 13: / Line 13: @@
     - Bias Tee Low/High
   - If the cavity is interlocked on something other than the above list reset the interlock and restart the cavity
-  - If the cavity trips off again on Cavity Field Low you may have to perform a reduce recover on the surrounding cavities
+  - If the cavity trips off again or trips off on Cavity Field Low you may have to perform a reduce recover on the surrounding cavities. If cavity trips off again skip to last step
   - Call SRF personnel on call
+===== Links/Media =====
+  * [[https://portal.frib.msu.edu/sites/accsystems/preoperation/_layouts/15/WopiFrame2.aspx?sourcedoc=%7bEEE947E8-4FAA-47DB-BBAB-4FAE59CD87ED%7d|SRF call list]]
+  * {{task:srf_marked_interlock.png}}