Differences

This shows you the differences between two versions of the page.

--- task:fsee_viewertransform [2025/05/06 08:38] – lange
+++ task:fsee_viewertransform [2025/05/06 09:02] (current) – lange
@@ Line 7: / Line 7: @@
 {{:task:fsee_viewer_1.png?400|}}
-There may already be a Viola setting that is correctly transformed. Do File -> Open Setting and load the setting from /files/shared/beamops/FSEE_operation/ViolaSettings. If this does not correct the issue you need to use Transform & Trim.
+There may already be a Viola setting that is correctly transformed. Do File -> Open Setting and load the setting from /files/shared/beamops/FSEE_operation/ViolaSettings. Use the file with the latest time stamp. If this does not correct the issue you need to use Transform & Trim.
 ===== Transform & Trim =====
@@ Line 13: / Line 13: @@
 {{:task:fsee_viewer_2.png?400|}}
   * This displays the full camera image. If the viewer is not fully visible here, the camera must be adjusted in the tunnel.
-  * Once the full viewer is visible, drag the red "corners" to intersection points. Choose intersection points to create a roughly centered square. The dashed border shows the full image that will be displayed in the main Viola window.
+  * Once the full viewer is visible, drag the red "corners" to intersection points of the lines on the viewer. Choose intersection points to create a roughly centered square. The dashed border shows the full image that will be displayed in the main Viola window. Suggest doing a 5x5 or 6x6 square.
   * Count the number of horizontal squares between corners. Each square is 10 mm wide, so for 6 squares you should input 60 mm for the "Width" in the "Fiducials" section. Do the same for vertical as well.
   * Click "Apply" and "OK" to return to the main window. It should now look similar to below image