Differences

This shows you the differences between two versions of the page.

--- task:frib_beam_destination [2025/06/11 23:04] – ryans
+++ task:frib_beam_destination [2025/06/12 15:36] (current) – ryans
@@ Line 17: / Line 17: @@
 ==== Notes From Shane :)====
-  * Link/ Explanation to MPS DEvice Configuration guideline could be helpful, long term this also should be acquird info
   * phys calc isn't really necessary with the beam power calc on MPS operator, worth a mention and probably easier to use for newer operator
   * Also the importance of double checking Energy and Stripping eff especially would be a good tip
   * note that cw  is 100hz, 9950us
   * wouldn't include cavitiy monitoring, AP normally asks for this and immediately wants it done so it can be done in the moment without any surprise, also this opens the can of worms on how to accomplish this without explaining it
-  *
+  * You don't calculate anything in the Diag page, do you mean 5521 and Scott's tool?
+  * DCCTs are only for going past the target, generally I'd leave that as a separate section as you otherwise need to get into the weeds with checking the ARIS post etc.
+  * I'd probably do inhibit modes earlier, not a huge issue but similar to prev notes it's a bigger issue that I think could use more detail