**Tuesday, April 29, 2014**
  * Agenda
  -CoBo firmware updates (Nathan)
  -Overview of PAC 38 responses

**Tuesday, April 22, 2014**
  * Agenda
  -GET Configuration Program (Daniel)
  -AT-TPC pulser data analysis (Saul)

**Tuesday, April 15, 2014**
  * Agenda
  -Noise measurement for GET and AT-TPC (Wolfi)

**Tuesday, April 8, 2014**
  * Agenda
  -Trigger geometry generation program (Daniel)
  -Pad position convention update (Tan)
  -Update on firmware issues (Faisal)
  -Prototype gas test start (Saul)

**Tuesday, April 1, 2014**
  * Agenda
  -Commissioning Experiment Overview

**Tuesday, March 18, 2014**
  * Agenda
  -Commissioning Experiment Status

**Tuesday, March 11, 2014**
  * Agenda
  -Magnet cooling stopped (Daniel)
  -Prep for next week's commissioning run

**Tuesday, March 4, 2014**
  * Agenda
  -Detector gas handling connected
  -Micromegas pulser test (Daniel)

**Tuesday, February 25, 2014**
  * Agenda

**Tuesday, February 18, 2014**
  * Agenda
  -Micromegas fitting problem (Daniel)
  -DAQ trigger/time stamp

**Tuesday, February 11, 2014**
  * Agenda
  -AT-TPC attached to beamline/Hall probe  and source arm installed (Daniel)
  -Micromegas conditioning started (Saul)
  -LN2 filling of magnet started (Daniel)

**Tuesday, February 4, 2014**
  * Agenda
  -Received 1st Micromegas (Daniel)
  -AT-TPC setup vacuum considerations
  -DAQ status (Faisal)
  -Mutant/Firmware issues (Nathan)

**Tuesday, January 28, 2014**
  * Agenda
  -Micromegas update (Daniel)
  -ZAP and shielding (Faisal, Daniel)
  -Firmware update (Nathan)

**Tuesday, January 21, 2014**
  * Agenda
  -

**Tuesday, January 14, 2014**
  * Agenda
  -Micromegas manufacturing timeline (Daniel)
  -CoBo testing (Faisal)

**Tuesday, December 17, 2013**
  * Agenda
  -Fusion cross sections for 124Sn experiment (Tan)
  -Work with Mutant firmware for CoBo (Nathan)
  -Start on ZAP design (Faisal)

**Tuesday, December 10, 2013**
  * Agenda
  -Endplate holder fixed (Daniel)
  -Micromegas attachment discussion

**Tuesday, December 3, 2013**
  * Agenda
  -Planning for February AT-TPC run
  -Endplate holder on cart to be fixed (Daniel)

**Tuesday, November 26, 2013**
  * Agenda
  -Micromegas details (Faisal)
  -AT-TPC test experiment discussion
  -Notre Dame <sup>12</sup>B results (Saul)

**Tuesday, November 19, 2013**
  * Agenda
  -Placement of AT-TPC on cradle and cart and in solenoid (Daniel)
  -Discussion on Micromegas

**Tuesday, November 12, 2013**
  * Agenda
  -Progress on AT-TPC cart and cradle (Daniel)
  -Shutter doors being made, discussion on laser holes

**Tuesday, November 5, 2013**
  * Agenda
  -AT-TPC vacuum test with new copper plates (Daniel)
  -AT-TPC cart assembly started
  -<sup>124</sup>Sn(p,p) data (Tan)

**Tuesday, October 29, 2013**
  * Agenda
  -AT-TPC vacuum testing (Daniel)

**Tuesday, October 22, 2013**
  * Agenda
  -End plate modifications (Daniel)
  -CoBo's received

**Tuesday, October 15, 2013**
  * Agenda
  -AT-TPC chamber pumping test (Daniel)
  -AsAd cooling discussion

**Tuesday, October 8, 2013**
  * Agenda
  -End flange seal mounted, plan to pump detector (Daniel)

**Tuesday, October 1, 2013**
  * Agenda
  -AT-TPC assembly, Field cage, HV contact, accelerator tube assembled (Daniel)
  -Micromegas traces (Faisal)
  -ANL resonance histogram (Tan)

**Tuesday, September 24, 2013**
  * Agenda
  -Accelerator tube and cathode assembly update (Daniel)
  -10Be angular distributions (Adam)
  -STPC GET test results (Genie)

**Tuesday, September 17, 2013**
  * Agenda
  -Field cage and accelerator tube assembly update (Daniel)
  -STPC GET test (Zibi)

**Tuesday, September 10, 2013**
  * Agenda
  -Accelerator tube assembly and last potential ring connection (Daniel)
  -10Be analysis update (Adam)

**Tuesday, August 27, 2013**
  * Agenda
  -AT-TPC detector assembly (Daniel)
  -3 AsAd test (Nathan)

**Tuesday, August 20, 2013**
  * Agenda
  -LHe liquifier received (Daniel)
  -Assembly plans, leak checking going on (Daniel)
  -ANL analysis update (Tan)
  -Micromegas, CoBo firmware update (Faisal, Nathan)

**Tuesday, August 13, 2013**
  * Agenda
  -Notre Dame experiment summary (Tan)
  -Update on AT-TPC parts (Saul)
  -CoBo firmware update (Nathan)
  -Discussion on tracking and visualization

**Tuesday, July 23, 2013**
  * Agenda
  -CoBo network and memory performance (Faisal)
  -ND experiment prep (Saul)
  -Test chamber results (Maxime, Elodie)
  -Fission data analysis (Guillaume, Cathleen)

**Tuesday, July 16, 2013**
  * Agenda
  -Detector field cage assembly (Daniel, Josh)
  -CoBo ethernet and firmware (Faisal, Nathan)
  -ANL experiment analysis update (Tan)
  -Test chamber fission measurement (Cathleen, Guillaume)

**Tuesday, July 9, 2013**
  * Agenda
  -Detector cathode assembly (Daniel, Josh)
  -CoBo firmware update (Faisal, Nathan)
  -Discussion about upcoming ND alpha decay run
  -Cf source holder (Maxime)

**Tuesday, July 2, 2013**
  * Agenda
  -AT-TPC fabrication update (Daniel)
  -ANL analysis update (Tan)
  -Cf source measurements (Cathleen, Guillaume)

**Tuesday, June 25, 2013**
  * Agenda
  -Neural network work (Josh)
  -10Be analysis (Adam)
  -CoBo testing (Faisal)
  -3-body decay charge deposit calculations (Guillaume)

**Tuesday, June 18, 2013**
  * Agenda
  -Introduction of 3 new students (Daniel)
  -Field cage development update (Daniel)
  -Summer experiment at Notre Dame (Saul)
  -Laser testing results with test chamber (Maxime)
  -Alpha range calculation for 12C 3-alpha decay (Guillaume)
  -CoBo firmware update (Faisal)
  -Multiplicy trigger update (Nathan)
  -Measurements with fission source (Wolfi)

**Tuesday, May 28, 2013**
  * Agenda
  -Field cage development update (Daniel)
  -Solenoid cooling update (Daniel)
  -Laser testing results with test chamber (Saul)
  -Diffusion calculation for 12B experiment (Maxime)
  -Alpha range calculation for 12C 3-alpha decay (Guillaume)
  -CoBo firmware update (Nathan)

**Tuesday, May 21, 2013**
  * Agenda
  -Status of LHe fill of Solenoid (Daniel)
  -CoBo testing update (Faisal)
  -12C 3-body decay simulation (Wolfi)
  -Laser testing started (Saul)

**Tuesday, May 14, 2013**
  * Agenda
  -m-CoBo update, DDR2 memory, Flash, etc. test (Faisal)
  -ANL analysis update (Tan)
  -AT-TPC fabrication update (Daniel)
  -Transfer LN2 to LN2 shield from He vessel (Daniel)

**Tuesday, May 7, 2013**
  * Agenda
  -Solenoid cooling status (Daniel)
  -Laser safety review and future test plans (Saul)
  -CoBo testing update (Daniel)

**Tuesday, April 30, 2013**
  * Agenda
  -CoBo shipping update (Daniel)
  -10Be analysis update (Adam)
  -Solenoid cooling started (Daniel)
  -ANL upcoming experiment update (Tan)
  -Work started on UV laser (Wolfi)

**Tuesday, April 23, 2013**
  * Agenda
  -Field cage update (Daniel)
  -Experiment plans, ANL, Notre Dame
  -Diode protection circuit discussion
  -Update on time differences for ANL data (Tan)

**Tuesday, April 16, 2013**
  * Agenda
  -Field cage measurements (Daniel)
  -ANL data sorting (Tan)
  -CoBo Power (Faisal)

**Tuesday, April 9, 2013**
  * Agenda
  -Field cage cleaned (Daniel)
  -ANL experiment magnetic field considerations
  -plan to cool solenoid (Daniel)
  -firmware adapting to full CoBo (Faisal)
  -CoBo clock architecture (Faisal)

**Tuesday, April 2, 2013**
  * Agenda
  -124Sn Argonne test run update (Daniel)
  -Field cage machined and received
  -CoBo v.0.2 memory (Faisal)
  -Gas handling update (Zach M)

**Tuesday, March 12, 2013**
  * Agenda
  -10Be data analysis update (Adam)
  -ANL experiment details (Tan)
  -progress on multiplicity trigger (Nathan, Tan)

**Tuesday, March 5, 2013**
  * Agenda
  -ANL experiment details (Tan)
  -discussion on multiplicity trigger, sparking limit for Sn beams at ANL
  -CoBo design update (Faisal)
  -AsAd's ordered (Daniel)
  -Discussion of card shielding

**Tuesday, February 26, 2013**
  * Agenda
  -ANL experiment scheduled (Tan)
  -Multiplicity trigger discussion
  -CoBo progress (Faisal)

**Tuesday, January 22, 2013**
  * Agenda
  -AT-TPC Project Timeline (Daniel)
  -Notre Dame experiment prep
  -CoBo memory debugging (Faisal)

**Tuesday, January 15, 2013**
  * Agenda
  -CoBo work, VxWorks image generation (Faisal, Shelbi, Patrick)
  -Discussion of mesh signals for fission fragments

**Tuesday, January 8, 2013**
  * Agenda
  -New Micromegas update
  -Notre Dame experiment scheduled

**Tuesday, December 11, 2012**
  * Agenda
  -Field cage received (Daniel)
  -Drawings submitted to shop
  -Cobo development update (Faisal)
  -Prototype Micromegas design update (Saul)

**Tuesday, December 4, 2012**
  * Agenda
  -GET controller and Micromegas testing (Tan, Ian)
  -Micromegas design update (Faisal)

**Tuesday, November 27, 2012**
  * Agenda
  -AT-TPC event generator (Daniel)
  -GET software update (Tan, Nathan)
  -Prototype Micromegas pad design (Saul)
  -Cobo Gigabit ethernet (Faisal)

**Tuesday, November 20, 2012**
  * Agenda
  -Detector drawing almost approved (Daniel)
  -Prototype Micromegas Pad design (Saul)
  -CoBo Gigabit work (Faisal)

**Tuesday, November 13, 2012**
  * Agenda
  -AT-TPC cart design (Daniel)
  -GET Controller software updated (Nathan)

**Tuesday, November 8, 2012**
  * Agenda
  -Plans to order AGET chips (Daniel)
  -GET debugging (Nathan)

**Tuesday, October 30, 2012**
  * Agenda
  -AT-TPC fabrication progress (Daniel)
  -Gas handling update (Zach)

**Tuesday, October 23, 2012**
  * Agenda

**Tuesday, October 16, 2012**
  * Agenda

**Tuesday, October 9, 2012**
  * Agenda
   -AT-TPC design approval in process (Daniel)
   -Saclay AsAd 1.1 test after repair (Tan)
   -CoBo firmware updated for use with multiple reduced CoBo's (Nathan)
   -MCP testing setup (Adam)

**Tuesday, October 2, 2012**
  * Agenda
   -Fixed regulator for Saclay AsAd 1.1 (Tan)
   -Agiltron test (Saul)
   -Reduced CoBo update (Nathan)
   -Micromegas PCB update (Faisal)
   -8Be kinematics (Aimee)

**Tuesday, September 25, 2012**
  * Agenda
   -Comparison of Daisuke's analysis of 6He elastic scattering data (Aimee)
   -Saclay AsAd 1.1 testing (Tan, Aimee, Nathan)
   -CoBo firmware for ethernet frames update (Nathan)
   -CoBo processor status (Faisal)

**Tuesday, September 18, 2012**
  * Agenda
   -Field cage fabrication started (Daniel)
   -Hit pattern and thresholds test for GET (Tan, Aimee)
   -New pump and compressor update (Zach)
   -MCP testing setup (Adam)
   -Pad design (Faisal)

**Tuesday, September 11, 2012**
  * Agenda
   -AT-TPC source arm design update (Daniel)
   -Test chamber data, micromegas troubleshooting (Tan, Aimee)
   -CoBo update and micromegas pad design (Faisal)

**Tuesday, September 4, 2012**
  * Agenda
   -GET electronics, testing saturation problem (Tan, Aimee)
   -Gas handling, compressor and pump update (Zach)
   -10Be analysis (Adam)
   -Pad design implementation status (Faisal)

**Tuesday, August 28, 2012**
  * Agenda
   -AT-TPC magnet yoke assembled and put in place (Daniel)
   -AT-TPC design updates, Gas flow tube size for flow rate (Daniel)
   -Ring cutter design (Daniel)
   -GET multiplicity measurements (Tan, Aimee)

**Tuesday, August 14, 2012**
  * Agenda
   -GET testing update (Tan, Aimee)
   -10Be analysis (Adam)
   -Field cage ring construction (Ian, Wolfi)
   -CoBo update (Faisal)

**Tuesday, August 7, 2012**
  * Agenda
   -Fission source measurements (Remi, Malek, Tan)
   -GET software problems
   -Pad plane design, research on laser, AT-TPC Mechanical Design Review (Saul)
   -10Be + alpha data analysis update (Adam)
   -CoBo, DDR memory testing (Faisal)

**Tuesday, July 31, 2012**
  * Agenda
   -Problems and progress on fission source measurement in test chamber (Remi, Malek, Tan)
   -CoBo update (Faisal)

**Tuesday, July 24, 2012**
  * Agenda
   -Micromegas pad pattern with fine pitch area (Saul)
   -8Be statistics update (Aimee)
   -Tiled micromegas data taking and mapping (Remi, Malek, Tan)
   -GET electronics testing (Wolfi, Tan)
   -CoBo testing/ZAP update (Faisal)

**Tuesday, July 17, 2012**
  * Agenda
   -More data taken for tiled resitive micromegas (Malek, Remi, Tan)
   -Gas tube progress (Ian)
   -Prototype CoBo boards received (Faisal)

**Tuesday, July 10, 2012**
  * Agenda
   -Tiled micromegas measurements (Malek, Remi, Tan)
   -10Be angle measurements (Adam)
   -CoBo and ZAP update (Faisal)

**Tuesday, July 3, 2012**
  * Agenda
   -Considerations for ZAP/AsAd mounting, shielding, cooling
   -GET electronics testing started (Tan, Faisal)
   -Micromegas pad design considerations (Saul)
   -Allene test results (Malek, Remi)

**Tuesday, June 26, 2012**
  * Agenda
   -Endplate design details (Daniel)
   -10Be + 6He analysis (Adam)
   -Gas handling parts ordered (Zach)
   -Plan for gas tubes for Prototype (Ian)
   -GET software installation and testing plans (Tan, Daniel)
   -Pad simulation update (Saul)

**Tuesday, June 19, 2012**
  * Agenda
   -Allene measurements (Malek, Remi)
   -8,9Be analysis (Aimee)
   -MCP housing modifications (Adam)
   -CoBo update (Faisal)

**Tuesday, June 12, 2012**
  * Agenda
   -Pad geometry simulation (Saul)
   -GET software update (Nathan)
   -CoBo and ZAP update (Faisal)

**Tuesday, June 5, 2012**
  * Agenda
   -Allene testing (Malek, Remi, Tan)
   -Micromegas pad simulation results (Saul)
   -Be analysis (Aimee)
   -ZAP design (Faisal)

**Tuesday, May 29, 2012**
  * Agenda
   -End plate developments (Daniel)
   -Gas mixture (Ar-H2) measurements (Malek, Remi, Tan)
   -Be fusion analysis (Aimee)
   -ZAP design (Faisal)

**Tuesday, May 22, 2012**
  * Agenda
   -End plate prototype (Daniel)
   -Physics discussion meetings to start

**Thursday, May 10, 2012**
  * Agenda
   -Solenoid enclosure and magnetic field considerations (Daniel)
   -ZAP design considerations (Daniel)
   -GET raw data unpacking (Tan)
   -CoBo quotes (Faisal)
   -Agiltron micromegas testing (Saul, Wolfi)

**Thursday, May 3, 2012**
  * Agenda
   -ATTPC final design almost ready. HV was ordered this morning. (Daniel)
   -Gas handling system (Zach)
   -Test with micromegas from Agiltron (Wolfi)
   -Conditioning of micromegas, simulation progress (Saul)
   -Board designed about to be submitted (Faisal)
   -9Be and 8Be (Aimee)
   -Repairing MCP housing, root code (Adam)

**Thursday, April 25, 2012**
  * Agenda
   -GET software fully compiled in MAC (Nathan is fixing some bugs)  (Daniel)
   -Gas handling system (Zach/John)
   -Shielding of the solenoid (Wolfi)
   -Conditioning of micromegas (Saul)
   -SBIR will send commercial micromegas to test (Wolfi)
   -9Be and 8Be (Aimee)
   -Repairing MCP housing (Adam)


**Thursday, April 19, 2012**
  * Agenda
   -Power supply quote (Daniel)
   -Conditioning of micromegas (Tan and Saul)
   -Mapping on the way while waiting for the connectors to arrive (Daniel and Ian)
   -Mechanical design almost ready. Working in a transportation cart for the detector (Daniel)
   -9Be and 8Be (Aimee)
   -Simulation in progress (Saul)
   -Dineutron FRESCO simulation (Adam)

**Thursday, April 12, 2012**
  * Agenda
   -AGET, AsAd update and plans for testing (Nathan)
   -Proposal for fission studies with Prototype (Bill)

**Thursday, April 5, 2012**
  * Agenda
   -AsAd pinout (Nathan)
   -Plans for conditioning micromegas and test electronics
   -Discussion on programmable ZAP
   -Magnet yoke, fringe field calculations underway (Daniel)
   -Search for 8Be (Aimee)

**Thursday, March 29, 2012**
  * Agenda
   -Power supply quotes (Daniel)
   -Search for 9Be (Aimee)
   -Discussion on amplifiers and linear circuits
   -Gas handling system update (Zach)
   -COBO update (Faisal)

**Thursday, March 23, 2012**
  * Agenda
   -AT-TPC flange design (Daniel)
   -AGET testing and COBO progress (Nathan, Faisal)
   -Micromegas pad design considerations (Saul)

**Thursday, March 1, 2012**
  * Agenda
   - Solenoid field calculations (Daniel)
   - ND experiment Prep
   - AGET testing update (Nathan) 

**Thursday, February 23, 2012**
  * Agenda
   - Samurai TPC pad plane (Jon Barney)
   - AT-TPC flange design (Daniel)
   - Allene test results (Tan)
   - 6He data analysis (Aimee)
   - ND experiment trigger (Wolfi)

**Thursday, February 16, 2012**
  * Agenda
   - Prep for ND experiment
   - Ar + H2 tests (Tan, Saul)
   - COBO DDR update (Faisal)

**Wednesday, February 8, 2012**
  * Agenda
   - Prep Issues for ND experiment, adapter piece for MCP/Prototype (Adam, Tan)
   - COBO update (Faisal)
   - Gas Handling update (Zach)

**Thursday, February 3, 2012**
  * Agenda
   - Update from Bob Flight on AT-TPC design (Daniel)
   - Adaptor Board status (Tan, Ian)
   - AGET testing update (Nathan)
   - Gas Handling update, discussion of need for recirculation and gas chromatagraph (Zach, John)

**Thursday, January 26, 2012**
  * Agenda
   - NIM signal to T2K test (Tan)
   - Resistive Micromegas Adapter board (Ian)
   - COBO, crate setup (Faisal)
   - Gas handling system update (Zach)

**Thursday, January 19, 2012**
  * Agenda
   - Ar + H2 mixture test results (Wolfi, Tan, Ian)
   - Notre Dame experiment scheduling and needs
   - AGET testing to be planned (Nathan)
   - COBO update, issues with DDR memory (Faisal)
   - Gas handling system requirements (John)
   - ND date analysis (Adam, Aimee)

**Thursday, January 12, 2012**
  * Agenda
   - Test of resistive micromegas, Adapter board (Tan, Ian)
   - Plan for Ar+H test (Wolfi, Tan, Ian)
   - some thoughts about ND experiment trigger
   - Gas handling system update (Zach)
   - Micromegas pad design

**Thursday, January 5, 2012**
  * Agenda
    - AT-TPC Design update, chamber shortened (Daniel)
    - Resistive Micromegas Adapter board (Ian)
    - AGET testing (Nathan)
    - COBO update (Faisal)
    - Allene info (Tan)

**Thursday, December 22, 2011**
  * Agenda
    - AT-TPC Design update
    - COBO, change from 3 to 1 data format (Nathan)

**Thursday, December 15, 2011**
  * Agenda
    - Resistive Micromegas, possibilities for capacitance measurement
    - Plan to test different gas mixtures (Ar+H, allene), (Ian)
    - Design of resistive Micromegas adapter board (Ian)

**Thursday, December 8, 2011**
  * Agenda
   - Resistive Micromegas Simulations (Wolfi)
   - GET meeting: GET board presented (Faisal)
   - need to test logic in chip
   - hit pattern recognition possible?

**Thursday, November 3, 2011**
  * Agenda
    - ND experiment in October (DS)
    - GET (Nathan)

**Thursday, September 15, 2011**
  * Agenda
    - CoBo (Nathan)
    - ND experiment in October (DS)
    - MCP (Adam/Wes)

**Thursday, September 08, 2011**
  * Agenda
    - ND experiment in October (DS)
    - Design effort/ Gas handling (Daniel)
    - ND visit & MCP (Adam/Wes)
    - GET (Nathan)
    - Testing of Micromegas with pulser(Wolfi)

**Thursday, September 01, 2011**
  * Agenda
    - Test chamber with ZAP/ ND experiment in October (DS)
    - PCB for MCP (Adam/Wes)
    - CoBo (Nathan)
   
**Thursday, August 25, 2011**

**Thursday, August 11, 2011**
  * Agenda
    - Test chamber with ZAP (DS)
    - CoBo (Nathan)
    - Analysis of ND fusion data (Aimee)
    - Gas handling system (John)

**Thursday, August 4, 2011**
  * Agenda
    - Analysis of ND data (DS)
    - CoBo (Nathan)
    - Analysis of ND fusion data (Aimee)

**Thursday, July 28, 2011**
  * Agenda
    - Range analysis for hydrogen (Fred)
    - Correlation between pads of Micromegas (Fabien)
    - New AsAd board (Nathan)
    - MCP (Adam)
    - Resistive Micromegas (Wolfi)

**Thursday, July 21, 2011**
  * Agenda
    - ReA3 layout (Fernando)
    - Delay line (Adam/Aimee)
    - Resistive Micromegas (Wolfi)
    - Range analysis for hydrogen (Fred)
    - Correlation between pads of Micromegas (Fabien)
    - Gas handling system (John)
    - Spring connector (Bill)
    - ZAP/Micromegas for Prototype (Wes)

**Thursday, July 14, 2011**
  * Agenda
    - ReA3 layout (Fernando)
    - Samurai TPC (Rebecca) 
    - CoBo (Nathan/Faisal)
    - Gas handling system (John)
    - Correlation between pads of Micromegas (Fabien/Fred)

**Thursday, July 7, 2011**
  * Agenda
    - CoBo (Nathan/Faisal)
    - Narval (Eugene)
    - Delay line for the MCP (Adam/Aimee)
    - Analysis of the hydrogen data / Pad response (Fabien/Fred)

**Thursday, June 30, 2011**
  * Agenda
    - Test of hydrogen (Dany)
    - Analysis of the hydrogen data (Fabien)
    - Simulation of the pad responses (Fred)
    - Narval (Eugene/Fred)
    - CoBo (Nathan/Faisal/Gilles)
    - Delay line for the MCP (Adam)
    - Resistive Micromegas (Aimee)

**Thursday, June 23, 2011**
  * Agenda
    - CoBo/AsAd (Nathan)
    - uTCA (Faisal)
    - ND analysis (DS)
    - Hydrogen test (Dany)
    - Charge division (Aimee)
    - Analysis of H2 data (Fred/Fabien) 

**Thursday, June 16, 2011**
  * Agenda
    - ND beam monitor / ND analysis (DS)
    - Hydrogen test (Dany)
    - Reaction calculation (Adam)
    - CoBo status (Nathan)
    - Design of the AT-TPC (Daniel) 

**Thursday, June 9, 2011**
  * Agenda
    - ND beam development (DS)
    - P10 test (Eugene)
    - MCP (Adam, Aimee)
    - CoBo status (Nathan) 

**Thursday, June 2, 2011**
  * Agenda
    - Test of hydrogen/P10 (Dany)
    - He+Isobutane/ ND beam development (DS)
    - MCP (Adam, Aimee)
    - CoBo status (Faisal) 

**Thursday, May 26, 2011**
  * Agenda
    - Preparation for ND fall/ He+Isobutane (DS)
    - MCP (Adam, Aimee)
    - AsAd status (Nathan) 
    - CoBo status (Faisal) 

**Thursday, May 19, 2011**
  * Agenda
    - Test of hydrogen gas (Eugene, Dany) 
    - Analysis of the Notre Dame data (DS)
    - MCP (Adam, Aimee)
    - AsAd status (Nathan) 
    - CoBo status (Faisal) 
    - Gas handling system test (John) 

**Thursday, May 12, 2011**
  * Agenda
    - Analysis of the Notre Dame data (DS)
    - Test of hydrogen gas (Eugene, Dany) 
    - Resistive Micromegas (Wolfi) 
    - MCP (Adam, Aimee)
    - AsAd status (Nathan) 

**Thursday, May 5, 2011**
 
**Thursday, April 28, 2011**
   * Agenda
     - Commissioning at Notre Dame(DS)


**Thursday, March 17, 2011**
   * Agenda
     - Schedule of transport(DS)
     - Upgraded T2K (Eugene) 
     - Reduced CObo (Nathan)
     - MCP(Adam)

**Thursday, March 10, 2011**
   * Agenda
     - Visit to ND (DS)
     - Upgraded T2K (Eugene) 
     - Stay at Saclay (Nathan)
     - MCP(Adam)

**Thursday, March 3, 2011**
   * Agenda
     - Analysis of the wire plane (Lu)     
     - Prototype AT-TPC (DS)
     - Upgraded T2K (Eugene) 
     - GET (Faisal)
     - Power Supply (Daniel)

**Thursday, February 24, 2011**
   * Agenda
     - Prototype AT-TPC: Uniformity, time dependence (DS)
     - Power supply for GET (Eugene) 
     - MCP & beam window foil (Adam)
     - Visit to Saclay (Nathan)
     - Gas handling system (John)

**Thursday, February 17, 2011**
   * Agenda
     - ZAP (Mike)
     - Trigger (Wolfi) 
     - MCP (Adam)
     - Matsusada Power Supply (Daniel)

**Thursday, February 10, 2011**
   * Agenda
     - The beam line ladder (Mike)
     - Gas handler (John)
     - The Prototype AT-TPC (DS)
     - Reduced Cobo (Nathan)
     - Upgraded T2K and its support(Eugene)
     - Cross talk of the PCB (Bill)
     - Preliminary Project Plan (Daniel)

**Thursday, February 3, 2011**
   * Agenda
     - The Prototype AT-TPC (DS)
     - Upgraded T2K, grounding of the GET (Eugene)
     - micro TCA (Faisal, Nathan)
     - Gas handler (John)

**Thursday, January 27, 2011**
   * Agenda
     - Designing of the AT-TPC (Marius)
     - The Prototype AT-TPC (DS)
     - Upgraded T2K, grounding of the GET (Eugene)

**Friday, January 14, 2011**
   * Agenda
     - The Prototype AT-TPC (DS)
     - Designing of the AT-TPC (Marius)
     - Designing of the ZAP (Mike)
     - Status of the Prototype GET (Nathan)


**Thursday, January 6, 2011**
   * Agenda
     - The DAQ, the new T2K (Eugene)
     - The Prototype AT-TPC (DS)
     - Designing of the AT-TPC (Marius)
     - Development of the gas handler (John)
     - Micro TCA (Faisal)
     - Status of the Prototype GET (Nathan)

**Thursday, December 30, 2010**

**Thursday, December 16, 2010**
   * Agenda
     - Update of the Prototype AT-TPC (DS/Eugene)
     - Commissioning at ND (DS)
     - New T2K (Eugene)
     - Status of the stay of Nathan in Bordeaux (Daniel/Faisal)

**Thursday, December 9, 2010**
   * Agenda
     - Update of the Prototype AT-TPC (DS)
     - DAQ system for the GET (Eugene)
     - Reduced CoBo update (Faisal)

**Thursday, December 2, 2010**
   * Agenda
     - Update of the Prototype AT-TPC (DS)
     - Reduced CoBo update (Nathan)

**Thursday, November 18, 2010**
   * Agenda
     - Update of the Prototype AT-TPC (DS)
     - Design of the AT-TPC (Marius)
     - Reduced CoBo update (Nathan)

**Thursday, November 11, 2010**
   * Agenda
     - Commissioning at ND (DS)
     - Reduced CoBo update (Nathan)

**Thursday, November 4, 2010**
   * Agenda
     - Update of testing of the Prototype AT-TPC (DS)
     - Reduced CoBo update (Nathan)
     - Design of the Field Cage (Jon)

**Thursday, October 28, 2010**
   * Agenda
     - The cathode power supply issue (DS)
     - Conditioning of the Micromegas (Mike)
     - Reduced CoBo update (Nathan)
     - Testing of the CO2 trap (John/Mike)
     - Design of the Field Cage (Jon)

**Thursday, October 21, 2010**
   * Agenda
     - Testing of the CO2 trap (Mike)
     - The control software of power supplies (Eugene)
     - Assembly of the Prototype AT-TPC (DS/Mike)

**Friday, October 15, 2010**
   * Agenda
     - Report on the visit of CEA-Saclay (Nathan/Eugene)

**Thursday, October 7, 2010**
   * Agenda
     - Assembly of the Prototype AT-TPC (DS)

**Thursday, September 30, 2010**
   * Agenda
     - Micromegas fabrication at Saclay (Mike/Bill)
     - Progress on assembly of prototype detector (Daisuke)

**Thursday, September 23, 2010**
   * Agenda
     - Cable & remote control of high voltage power supply (Eugene)
     - Status of fabrication of Micromegas (Daisuke)
     - Status of hydrogen/deuterium safety (Daisuke)
     - Status of assembly of Prototype AT-TPC (John/Jon/Daisuke)
     - Status of testing of the CO2 trap (John)
     - Reduced CoBo/Prototype GET plan (Nathan)

**Thursday, September 16, 2010**

**Thursday, September 9, 2010**

**Thursday, September 2, 2010**

**Thursday, August 26, 2010**
   * Agenda
     - Progress on prototype fabrication and assembly (Mike)
     - Cathode voltage feedthru for the AT-TPC (Eugene)
     - Progress on wire plane tests (Daisuke)

**Thursday, August 12, 2010**

**Thursday, August 5, 2010**
   * Agenda
     - GET status (Nathan)
     - Laser calibration system (Justin/Mike)
     - Gas handling system for the Prototype (DS)

**Thursday, July 29, 2010**
   * Agenda
     - Design of the AT-TPC (Harry)
     - The status of the analysis of the Micromegas test (Anthony)

**Thursday, July 22, 2010**
   * Agenda
     - Review of the gas handling system of the AT-TPC (John/Ana)
     - GET power supply / Remote control system (Eugene)

**Thursday, July 15, 2010**
   * Agenda
     - Status of testing of Micromegas (Anthony/Claire)
     - Status of MCP design (Justin)
     - Misc. information (DS)

**Thursday, July 8, 2010**
   * Agenda
     - Status of the design of the Prototype (Daisuke)
     - Status of the new test room (Bill)
     - Multi-pin connector connection test kit with LED (Mike)
     - Laser & X-Y table (Mike/Justin)
     - Misc (Hydrogen gas, Gas handling system review, Power supply)

**Thursday, July 1, 2010**

**Thursday, June 24, 2010**
   * Agenda
     - review released drawing for the prototype from B. Flight, before sending to J. Ottarson for final design review (Daisuke)
     - progress on testing of gas mixtures and energy resolution (Claire)
     - suggestions for organization of test area (Bill)
     - Announcements (Daniel)

**Thursday, June 17, 2010**
   * Agenda
     - Update of the design of the AT-TPC (Harry)
     - Status of the test of Micromegas (Claire/Justin/Anthony){{:wm_6-17-2010.pptx| Slides}}

**Thursday, June 10, 2010**
   * Agenda
     - Update of the design of the Prototype AT-TPC (DS)

**Thursday, June 3, 2010**
   * Agenda
     - Status of move to new testing area and test setup (Daisuke){{:wm_6-03-2010_ds.pptx| Slides}}
     - Discussion of milestone dates for prototype (Daisuke/Daniel)
     - Status of CoBo development (and other DAQ components?) (Nathan)

**Thursday, May 27, 2010**
   * Agenda
     - New test area organization and progress (Daisuke)
     - Tests of micromegas - resolution with alpha source (Claire){{:wm_5-27-2010.pptx| Slides}}
     - Preparation of issues to discuss with Bob Flight at next meeting this coming Friday
     - Breakdown of AT-TPC project in sub-projects (Daniel)

**Thursday, May 20, 2010**
   * Agenda
     - New test room update
     - Testing of Micromegas; reduction of negative cross talk {{:wm_5-20-2010.pptx| Slides}}
     - ANSYS for studying mechanical characteristics of the AT-TPC
     - Design of Prototype AT-TPC at Rochester

**Thursday, May 13, 2010**
   * Agenda
     - Testing of micromegas in test chamber {{:wm_5-13-2010_ds.pptx| Slides}}
     - Status of clean room and its infrastructure
     - Status of connector board prototype
     - Prototype design at Rochester / organization of follow-up weekly meetings
     - Possibility of collaboration with Lawrence Livermore National Laboratory

**Thursday, May 6, 2010**
   * Agenda
     - Status of clean room and schedule of move to new testing/assembly area {{:wm_5-06-2010_ds.pptx| Slides}}
     - Micromegas tests: status and issues
     - Discussion about a laser calibration system {{:wm_5-06-2010_hm_lasercalibration.pptx| Slides}}
     - Gas handling system design status (feedback on work order, path forward)

**Thursday, April 29, 2010**
   * Agenda
     - Status of clean room (Daisuke){{:wm_4-29-2010_ds.pptx| Slides}}
     - Test of micromegas with new connectors (Mike/Daisuke)
     - Concept drawing for TPC angle mechanism (Harry)


**Thursday, April 22, 2010**
   * Agenda
     - Design of prototype in Rochester (Daisuke)
     - Gas handling system design (Fernando/Ana)
     - Clean room construction (Daniel/Daisuke)
     - Connector assembly prototype (Mike)
     - Discussion about items that should be procured ASAP (Bill)
     - Miscellaneous

**Thursday, April 15, 2010**


**Thursday, April 8, 2010**
  * {{:wm_4-08-2010_minute.docx|Minute}}
  * Agenda
    - The status of the CoBo (NU) [[https://project-actar-get.cea.fr/Groups/100_todolist/400_wp4_data_acquisi/slides_-_presentatio/workgroup_contents| Slides]]
    - The individual bias circuit and the insertion test kit of the Micromegas (MF)

**Thursday, April 1, 2010**
  * {{:wm_4-01-2010_minute.docx|Minute}}
  * Agenda
    - Micromegas design submission (MF) {{:wm_4-01-2010_mf_micromegas.pptx| Slides}} 
    - Test field cage (WM)
    - Status of the project management (DS) {{:wm_4-01-2010_ds.pptx| Slides}}
    - Forthcoming events (WM)


**Thursday, March 25, 2010**
  * {{:wm_3-25-2010_minute.docx|Minute}}
  * Agenda
    - Capacitance measurement of Micromegas (MF) {{:wm_3-25-2010_micromegas_capa_mf.pptx| Slides}}
    - Status of the Prototype design (WM/DS) 

**Thursday, March 18, 2010**

  * {{:wm_3-18-2010_minute.docx|Minute}}
  * Agenda
    - Electric field simulation (FM) {{:wm_3-18-2010_fm_garfield.ps| Simulation result}}
    - Filed cage design (DS) {{:wm_3-18-2010_dsx.pdf| Slides}}
    - ZAP design (WL)  [[https://project-actar-get.cea.fr/Groups/100_todolist/200_wp2_front_end_el/zap/slides-presentation/protection_unit_pres6362/view| ZAP circuit design]]     {{:zap_integration_at-tpc_2010-3-15_x.pdf|ZAP integration}} 
    - Micromegas capacitance (WM)
    - Purchasing of a scroll pump (FM/DS)