Differences

This shows you the differences between two versions of the page.

--- weekly_meeting [2014/04/15 15:50] – ahn
+++ weekly_meeting [2021/02/05 12:49] (current) – bazin
@@ Line 1: / Line 1: @@
-**Tuesday, April 15, 2014**
+** Analysis meeting **
-  * Agenda
+  Wednesdays at 3:00PM EST
-  -Noise measurement for GET and AT-TPC (Wolfi)
+  Zoom link: [[https://msu.zoom.us/j/93713496495]]
+** Progress meeting **
+  Thursdays at 3:00PM EST
+** [[Archive]] (2010-2014) **
-**Tuesday, April 8, 2014**
-  * Agenda
-  -Trigger geometry generation program (Daniel)
-  -Pad position convention update (Tan)
-  -Update on firmware issues (Faisal)
-  -Prototype gas test start (Saul)
-**Tuesday, April 1, 2014**
-  * Agenda
-  -Commissioning Experiment Overview
-**Tuesday, March 18, 2014**
-  * Agenda
-  -Commissioning Experiment Status
-**Tuesday, March 11, 2014**
-  * Agenda
-  -Magnet cooling stopped (Daniel)
-  -Prep for next week's commissioning run
-**Tuesday, March 4, 2014**
-  * Agenda
-  -Detector gas handling connected
-  -Micromegas pulser test (Daniel)
-**Tuesday, February 25, 2014**
-  * Agenda
-**Tuesday, February 18, 2014**
-  * Agenda
-  -Micromegas fitting problem (Daniel)
-  -DAQ trigger/time stamp
-**Tuesday, February 11, 2014**
-  * Agenda
-  -AT-TPC attached to beamline/Hall probe  and source arm installed (Daniel)
-  -Micromegas conditioning started (Saul)
-  -LN2 filling of magnet started (Daniel)
-**Tuesday, February 4, 2014**
-  * Agenda
-  -Received 1st Micromegas (Daniel)
-  -AT-TPC setup vacuum considerations
-  -DAQ status (Faisal)
-  -Mutant/Firmware issues (Nathan)
-**Tuesday, January 28, 2014**
-  * Agenda
-  -Micromegas update (Daniel)
-  -ZAP and shielding (Faisal, Daniel)
-  -Firmware update (Nathan)
-**Tuesday, January 21, 2014**
-  * Agenda
-  -
-**Tuesday, January 14, 2014**
-  * Agenda
-  -Micromegas manufacturing timeline (Daniel)
-  -CoBo testing (Faisal)
-**Tuesday, December 17, 2013**
-  * Agenda
-  -Fusion cross sections for 124Sn experiment (Tan)
-  -Work with Mutant firmware for CoBo (Nathan)
-  -Start on ZAP design (Faisal)
-**Tuesday, December 10, 2013**
-  * Agenda
-  -Endplate holder fixed (Daniel)
-  -Micromegas attachment discussion
-**Tuesday, December 3, 2013**
-  * Agenda
-  -Planning for February AT-TPC run
-  -Endplate holder on cart to be fixed (Daniel)
-**Tuesday, November 26, 2013**
-  * Agenda
-  -Micromegas details (Faisal)
-  -AT-TPC test experiment discussion
-  -Notre Dame <sup>12</sup>B results (Saul)
-**Tuesday, November 19, 2013**
-  * Agenda
-  -Placement of AT-TPC on cradle and cart and in solenoid (Daniel)
-  -Discussion on Micromegas
-**Tuesday, November 12, 2013**
-  * Agenda
-  -Progress on AT-TPC cart and cradle (Daniel)
-  -Shutter doors being made, discussion on laser holes
-**Tuesday, November 5, 2013**
-  * Agenda
-  -AT-TPC vacuum test with new copper plates (Daniel)
-  -AT-TPC cart assembly started
-  -<sup>124</sup>Sn(p,p) data (Tan)
-**Tuesday, October 29, 2013**
-  * Agenda
-  -AT-TPC vacuum testing (Daniel)
-**Tuesday, October 22, 2013**
-  * Agenda
-  -End plate modifications (Daniel)
-  -CoBo's received
-**Tuesday, October 15, 2013**
-  * Agenda
-  -AT-TPC chamber pumping test (Daniel)
-  -AsAd cooling discussion
-**Tuesday, October 8, 2013**
-  * Agenda
-  -End flange seal mounted, plan to pump detector (Daniel)
-**Tuesday, October 1, 2013**
-  * Agenda
-  -AT-TPC assembly, Field cage, HV contact, accelerator tube assembled (Daniel)
-  -Micromegas traces (Faisal)
-  -ANL resonance histogram (Tan)
-**Tuesday, September 24, 2013**
-  * Agenda
-  -Accelerator tube and cathode assembly update (Daniel)
-  -10Be angular distributions (Adam)
-  -STPC GET test results (Genie)
-**Tuesday, September 17, 2013**
-  * Agenda
-  -Field cage and accelerator tube assembly update (Daniel)
-  -STPC GET test (Zibi)
-**Tuesday, September 10, 2013**
-  * Agenda
-  -Accelerator tube assembly and last potential ring connection (Daniel)
-  -10Be analysis update (Adam)
-**Tuesday, August 27, 2013**
-  * Agenda
-  -AT-TPC detector assembly (Daniel)
-  -3 AsAd test (Nathan)
-**Tuesday, August 20, 2013**
-  * Agenda
-  -LHe liquifier received (Daniel)
-  -Assembly plans, leak checking going on (Daniel)
-  -ANL analysis update (Tan)
-  -Micromegas, CoBo firmware update (Faisal, Nathan)
-**Tuesday, August 13, 2013**
-  * Agenda
-  -Notre Dame experiment summary (Tan)
-  -Update on AT-TPC parts (Saul)
-  -CoBo firmware update (Nathan)
-  -Discussion on tracking and visualization
-**Tuesday, July 23, 2013**
-  * Agenda
-  -CoBo network and memory performance (Faisal)
-  -ND experiment prep (Saul)
-  -Test chamber results (Maxime, Elodie)
-  -Fission data analysis (Guillaume, Cathleen)
-**Tuesday, July 16, 2013**
-  * Agenda
-  -Detector field cage assembly (Daniel, Josh)
-  -CoBo ethernet and firmware (Faisal, Nathan)
-  -ANL experiment analysis update (Tan)
-  -Test chamber fission measurement (Cathleen, Guillaume)
-**Tuesday, July 9, 2013**
-  * Agenda
-  -Detector cathode assembly (Daniel, Josh)
-  -CoBo firmware update (Faisal, Nathan)
-  -Discussion about upcoming ND alpha decay run
-  -Cf source holder (Maxime)
-**Tuesday, July 2, 2013**
-  * Agenda
-  -AT-TPC fabrication update (Daniel)
-  -ANL analysis update (Tan)
-  -Cf source measurements (Cathleen, Guillaume)
-**Tuesday, June 25, 2013**
-  * Agenda
-  -Neural network work (Josh)
-  -10Be analysis (Adam)
-  -CoBo testing (Faisal)
-  -3-body decay charge deposit calculations (Guillaume)
-**Tuesday, June 18, 2013**
-  * Agenda
-  -Introduction of 3 new students (Daniel)
-  -Field cage development update (Daniel)
-  -Summer experiment at Notre Dame (Saul)
-  -Laser testing results with test chamber (Maxime)
-  -Alpha range calculation for 12C 3-alpha decay (Guillaume)
-  -CoBo firmware update (Faisal)
-  -Multiplicy trigger update (Nathan)
-  -Measurements with fission source (Wolfi)
-**Tuesday, May 28, 2013**
-  * Agenda
-  -Field cage development update (Daniel)
-  -Solenoid cooling update (Daniel)
-  -Laser testing results with test chamber (Saul)
-  -Diffusion calculation for 12B experiment (Maxime)
-  -Alpha range calculation for 12C 3-alpha decay (Guillaume)
-  -CoBo firmware update (Nathan)
-**Tuesday, May 21, 2013**
-  * Agenda
-  -Status of LHe fill of Solenoid (Daniel)
-  -CoBo testing update (Faisal)
-  -12C 3-body decay simulation (Wolfi)
-  -Laser testing started (Saul)
-**Tuesday, May 14, 2013**
-  * Agenda
-  -m-CoBo update, DDR2 memory, Flash, etc. test (Faisal)
-  -ANL analysis update (Tan)
-  -AT-TPC fabrication update (Daniel)
-  -Transfer LN2 to LN2 shield from He vessel (Daniel)
-**Tuesday, May 7, 2013**
-  * Agenda
-  -Solenoid cooling status (Daniel)
-  -Laser safety review and future test plans (Saul)
-  -CoBo testing update (Daniel)
-**Tuesday, April 30, 2013**
-  * Agenda
-  -CoBo shipping update (Daniel)
-  -10Be analysis update (Adam)
-  -Solenoid cooling started (Daniel)
-  -ANL upcoming experiment update (Tan)
-  -Work started on UV laser (Wolfi)
-**Tuesday, April 23, 2013**
-  * Agenda
-  -Field cage update (Daniel)
-  -Experiment plans, ANL, Notre Dame
-  -Diode protection circuit discussion
-  -Update on time differences for ANL data (Tan)
-**Tuesday, April 16, 2013**
-  * Agenda
-  -Field cage measurements (Daniel)
-  -ANL data sorting (Tan)
-  -CoBo Power (Faisal)
-**Tuesday, April 9, 2013**
-  * Agenda
-  -Field cage cleaned (Daniel)
-  -ANL experiment magnetic field considerations
-  -plan to cool solenoid (Daniel)
-  -firmware adapting to full CoBo (Faisal)
-  -CoBo clock architecture (Faisal)
-**Tuesday, April 2, 2013**
-  * Agenda
-  -124Sn Argonne test run update (Daniel)
-  -Field cage machined and received
-  -CoBo v.0.2 memory (Faisal)
-  -Gas handling update (Zach M)
-**Tuesday, March 12, 2013**
-  * Agenda
-  -10Be data analysis update (Adam)
-  -ANL experiment details (Tan)
-  -progress on multiplicity trigger (Nathan, Tan)
-**Tuesday, March 5, 2013**
-  * Agenda
-  -ANL experiment details (Tan)
-  -discussion on multiplicity trigger, sparking limit for Sn beams at ANL
-  -CoBo design update (Faisal)
-  -AsAd's ordered (Daniel)
-  -Discussion of card shielding
-**Tuesday, February 26, 2013**
-  * Agenda
-  -ANL experiment scheduled (Tan)
-  -Multiplicity trigger discussion
-  -CoBo progress (Faisal)
-**Tuesday, January 22, 2013**
-  * Agenda
-  -AT-TPC Project Timeline (Daniel)
-  -Notre Dame experiment prep
-  -CoBo memory debugging (Faisal)
-**Tuesday, January 15, 2013**
-  * Agenda
-  -CoBo work, VxWorks image generation (Faisal, Shelbi, Patrick)
-  -Discussion of mesh signals for fission fragments
-**Tuesday, January 8, 2013**
-  * Agenda
-  -New Micromegas update
-  -Notre Dame experiment scheduled
-**Tuesday, December 11, 2012**
-  * Agenda
-  -Field cage received (Daniel)
-  -Drawings submitted to shop
-  -Cobo development update (Faisal)
-  -Prototype Micromegas design update (Saul)
-**Tuesday, December 4, 2012**
-  * Agenda
-  -GET controller and Micromegas testing (Tan, Ian)
-  -Micromegas design update (Faisal)
-**Tuesday, November 27, 2012**
-  * Agenda
-  -AT-TPC event generator (Daniel)
-  -GET software update (Tan, Nathan)
-  -Prototype Micromegas pad design (Saul)
-  -Cobo Gigabit ethernet (Faisal)
-**Tuesday, November 20, 2012**
-  * Agenda
-  -Detector drawing almost approved (Daniel)
-  -Prototype Micromegas Pad design (Saul)
-  -CoBo Gigabit work (Faisal)
-**Tuesday, November 13, 2012**
-  * Agenda
-  -AT-TPC cart design (Daniel)
-  -GET Controller software updated (Nathan)
-**Tuesday, November 8, 2012**
-  * Agenda
-  -Plans to order AGET chips (Daniel)
-  -GET debugging (Nathan)
-**Tuesday, October 30, 2012**
-  * Agenda
-  -AT-TPC fabrication progress (Daniel)
-  -Gas handling update (Zach)
-**Tuesday, October 23, 2012**
-  * Agenda
-**Tuesday, October 16, 2012**
-  * Agenda
-**Tuesday, October 9, 2012**
-  * Agenda
-   -AT-TPC design approval in process (Daniel)
-   -Saclay AsAd 1.1 test after repair (Tan)
-   -CoBo firmware updated for use with multiple reduced CoBo's (Nathan)
-   -MCP testing setup (Adam)
-**Tuesday, October 2, 2012**
-  * Agenda
-   -Fixed regulator for Saclay AsAd 1.1 (Tan)
-   -Agiltron test (Saul)
-   -Reduced CoBo update (Nathan)
-   -Micromegas PCB update (Faisal)
-   -8Be kinematics (Aimee)
-**Tuesday, September 25, 2012**
-  * Agenda
-   -Comparison of Daisuke's analysis of 6He elastic scattering data (Aimee)
-   -Saclay AsAd 1.1 testing (Tan, Aimee, Nathan)
-   -CoBo firmware for ethernet frames update (Nathan)
-   -CoBo processor status (Faisal)
-**Tuesday, September 18, 2012**
-  * Agenda
-   -Field cage fabrication started (Daniel)
-   -Hit pattern and thresholds test for GET (Tan, Aimee)
-   -New pump and compressor update (Zach)
-   -MCP testing setup (Adam)
-   -Pad design (Faisal)
-**Tuesday, September 11, 2012**
-  * Agenda
-   -AT-TPC source arm design update (Daniel)
-   -Test chamber data, micromegas troubleshooting (Tan, Aimee)
-   -CoBo update and micromegas pad design (Faisal)
-**Tuesday, September 4, 2012**
-  * Agenda
-   -GET electronics, testing saturation problem (Tan, Aimee)
-   -Gas handling, compressor and pump update (Zach)
-   -10Be analysis (Adam)
-   -Pad design implementation status (Faisal)
-**Tuesday, August 28, 2012**
-  * Agenda
-   -AT-TPC magnet yoke assembled and put in place (Daniel)
-   -AT-TPC design updates, Gas flow tube size for flow rate (Daniel)
-   -Ring cutter design (Daniel)
-   -GET multiplicity measurements (Tan, Aimee)
-**Tuesday, August 14, 2012**
-  * Agenda
-   -GET testing update (Tan, Aimee)
-   -10Be analysis (Adam)
-   -Field cage ring construction (Ian, Wolfi)
-   -CoBo update (Faisal)
-**Tuesday, August 7, 2012**
-  * Agenda
-   -Fission source measurements (Remi, Malek, Tan)
-   -GET software problems
-   -Pad plane design, research on laser, AT-TPC Mechanical Design Review (Saul)
-   -10Be + alpha data analysis update (Adam)
-   -CoBo, DDR memory testing (Faisal)
-**Tuesday, July 31, 2012**
-  * Agenda
-   -Problems and progress on fission source measurement in test chamber (Remi, Malek, Tan)
-   -CoBo update (Faisal)
-**Tuesday, July 24, 2012**
-  * Agenda
-   -Micromegas pad pattern with fine pitch area (Saul)
-   -8Be statistics update (Aimee)
-   -Tiled micromegas data taking and mapping (Remi, Malek, Tan)
-   -GET electronics testing (Wolfi, Tan)
-   -CoBo testing/ZAP update (Faisal)
-**Tuesday, July 17, 2012**
-  * Agenda
-   -More data taken for tiled resitive micromegas (Malek, Remi, Tan)
-   -Gas tube progress (Ian)
-   -Prototype CoBo boards received (Faisal)
-**Tuesday, July 10, 2012**
-  * Agenda
-   -Tiled micromegas measurements (Malek, Remi, Tan)
-   -10Be angle measurements (Adam)
-   -CoBo and ZAP update (Faisal)
-**Tuesday, July 3, 2012**
-  * Agenda
-   -Considerations for ZAP/AsAd mounting, shielding, cooling
-   -GET electronics testing started (Tan, Faisal)
-   -Micromegas pad design considerations (Saul)
-   -Allene test results (Malek, Remi)
-**Tuesday, June 26, 2012**
-  * Agenda
-   -Endplate design details (Daniel)
-   -10Be + 6He analysis (Adam)
-   -Gas handling parts ordered (Zach)
-   -Plan for gas tubes for Prototype (Ian)
-   -GET software installation and testing plans (Tan, Daniel)
-   -Pad simulation update (Saul)
-**Tuesday, June 19, 2012**
-  * Agenda
-   -Allene measurements (Malek, Remi)
-   -8,9Be analysis (Aimee)
-   -MCP housing modifications (Adam)
-   -CoBo update (Faisal)
-**Tuesday, June 12, 2012**
-  * Agenda
-   -Pad geometry simulation (Saul)
-   -GET software update (Nathan)
-   -CoBo and ZAP update (Faisal)
-**Tuesday, June 5, 2012**
-  * Agenda
-   -Allene testing (Malek, Remi, Tan)
-   -Micromegas pad simulation results (Saul)
-   -Be analysis (Aimee)
-   -ZAP design (Faisal)
-**Tuesday, May 29, 2012**
-  * Agenda
-   -End plate developments (Daniel)
-   -Gas mixture (Ar-H2) measurements (Malek, Remi, Tan)
-   -Be fusion analysis (Aimee)
-   -ZAP design (Faisal)
-**Tuesday, May 22, 2012**
-  * Agenda
-   -End plate prototype (Daniel)
-   -Physics discussion meetings to start
-**Thursday, May 10, 2012**
-  * Agenda
-   -Solenoid enclosure and magnetic field considerations (Daniel)
-   -ZAP design considerations (Daniel)
-   -GET raw data unpacking (Tan)
-   -CoBo quotes (Faisal)
-   -Agiltron micromegas testing (Saul, Wolfi)
-**Thursday, May 3, 2012**
-  * Agenda
-   -ATTPC final design almost ready. HV was ordered this morning. (Daniel)
-   -Gas handling system (Zach)
-   -Test with micromegas from Agiltron (Wolfi)
-   -Conditioning of micromegas, simulation progress (Saul)
-   -Board designed about to be submitted (Faisal)
-   -9Be and 8Be (Aimee)
-   -Repairing MCP housing, root code (Adam)
-**Thursday, April 25, 2012**
-  * Agenda
-   -GET software fully compiled in MAC (Nathan is fixing some bugs)  (Daniel)
-   -Gas handling system (Zach/John)
-   -Shielding of the solenoid (Wolfi)
-   -Conditioning of micromegas (Saul)
-   -SBIR will send commercial micromegas to test (Wolfi)
-   -9Be and 8Be (Aimee)
-   -Repairing MCP housing (Adam)
-**Thursday, April 19, 2012**
-  * Agenda
-   -Power supply quote (Daniel)
-   -Conditioning of micromegas (Tan and Saul)
-   -Mapping on the way while waiting for the connectors to arrive (Daniel and Ian)
-   -Mechanical design almost ready. Working in a transportation cart for the detector (Daniel)
-   -9Be and 8Be (Aimee)
-   -Simulation in progress (Saul)
-   -Dineutron FRESCO simulation (Adam)
-**Thursday, April 12, 2012**
-  * Agenda
-   -AGET, AsAd update and plans for testing (Nathan)
-   -Proposal for fission studies with Prototype (Bill)
-**Thursday, April 5, 2012**
-  * Agenda
-   -AsAd pinout (Nathan)
-   -Plans for conditioning micromegas and test electronics
-   -Discussion on programmable ZAP
-   -Magnet yoke, fringe field calculations underway (Daniel)
-   -Search for 8Be (Aimee)
-**Thursday, March 29, 2012**
-  * Agenda
-   -Power supply quotes (Daniel)
-   -Search for 9Be (Aimee)
-   -Discussion on amplifiers and linear circuits
-   -Gas handling system update (Zach)
-   -COBO update (Faisal)
-**Thursday, March 23, 2012**
-  * Agenda
-   -AT-TPC flange design (Daniel)
-   -AGET testing and COBO progress (Nathan, Faisal)
-   -Micromegas pad design considerations (Saul)
-**Thursday, March 1, 2012**
-  * Agenda
-   - Solenoid field calculations (Daniel)
-   - ND experiment Prep
-   - AGET testing update (Nathan)
-**Thursday, February 23, 2012**
-  * Agenda
-   - Samurai TPC pad plane (Jon Barney)
-   - AT-TPC flange design (Daniel)
-   - Allene test results (Tan)
-   - 6He data analysis (Aimee)
-   - ND experiment trigger (Wolfi)
-**Thursday, February 16, 2012**
-  * Agenda
-   - Prep for ND experiment
-   - Ar + H2 tests (Tan, Saul)
-   - COBO DDR update (Faisal)
-**Wednesday, February 8, 2012**
-  * Agenda
-   - Prep Issues for ND experiment, adapter piece for MCP/Prototype (Adam, Tan)
-   - COBO update (Faisal)
-   - Gas Handling update (Zach)
-**Thursday, February 3, 2012**
-  * Agenda
-   - Update from Bob Flight on AT-TPC design (Daniel)
-   - Adaptor Board status (Tan, Ian)
-   - AGET testing update (Nathan)
-   - Gas Handling update, discussion of need for recirculation and gas chromatagraph (Zach, John)
-**Thursday, January 26, 2012**
-  * Agenda
-   - NIM signal to T2K test (Tan)
-   - Resistive Micromegas Adapter board (Ian)
-   - COBO, crate setup (Faisal)
-   - Gas handling system update (Zach)
-**Thursday, January 19, 2012**
-  * Agenda
-   - Ar + H2 mixture test results (Wolfi, Tan, Ian)
-   - Notre Dame experiment scheduling and needs
-   - AGET testing to be planned (Nathan)
-   - COBO update, issues with DDR memory (Faisal)
-   - Gas handling system requirements (John)
-   - ND date analysis (Adam, Aimee)
-**Thursday, January 12, 2012**
-  * Agenda
-   - Test of resistive micromegas, Adapter board (Tan, Ian)
-   - Plan for Ar+H test (Wolfi, Tan, Ian)
-   - some thoughts about ND experiment trigger
-   - Gas handling system update (Zach)
-   - Micromegas pad design
-**Thursday, January 5, 2012**
-  * Agenda
-    - AT-TPC Design update, chamber shortened (Daniel)
-    - Resistive Micromegas Adapter board (Ian)
-    - AGET testing (Nathan)
-    - COBO update (Faisal)
-    - Allene info (Tan)
-**Thursday, December 22, 2011**
-  * Agenda
-    - AT-TPC Design update
-    - COBO, change from 3 to 1 data format (Nathan)
-**Thursday, December 15, 2011**
-  * Agenda
-    - Resistive Micromegas, possibilities for capacitance measurement
-    - Plan to test different gas mixtures (Ar+H, allene), (Ian)
-    - Design of resistive Micromegas adapter board (Ian)
-**Thursday, December 8, 2011**
-  * Agenda
-   - Resistive Micromegas Simulations (Wolfi)
-   - GET meeting: GET board presented (Faisal)
-   - need to test logic in chip
-   - hit pattern recognition possible?
-**Thursday, November 3, 2011**
-  * Agenda
-    - ND experiment in October (DS)
-    - GET (Nathan)
-**Thursday, September 15, 2011**
-  * Agenda
-    - CoBo (Nathan)
-    - ND experiment in October (DS)
-    - MCP (Adam/Wes)
-**Thursday, September 08, 2011**
-  * Agenda
-    - ND experiment in October (DS)
-    - Design effort/ Gas handling (Daniel)
-    - ND visit & MCP (Adam/Wes)
-    - GET (Nathan)
-    - Testing of Micromegas with pulser(Wolfi)
-**Thursday, September 01, 2011**
-  * Agenda
-    - Test chamber with ZAP/ ND experiment in October (DS)
-    - PCB for MCP (Adam/Wes)
-    - CoBo (Nathan)
-**Thursday, August 25, 2011**
-**Thursday, August 11, 2011**
-  * Agenda
-    - Test chamber with ZAP (DS)
-    - CoBo (Nathan)
-    - Analysis of ND fusion data (Aimee)
-    - Gas handling system (John)
-**Thursday, August 4, 2011**
-  * Agenda
-    - Analysis of ND data (DS)
-    - CoBo (Nathan)
-    - Analysis of ND fusion data (Aimee)
-**Thursday, July 28, 2011**
-  * Agenda
-    - Range analysis for hydrogen (Fred)
-    - Correlation between pads of Micromegas (Fabien)
-    - New AsAd board (Nathan)
-    - MCP (Adam)
-    - Resistive Micromegas (Wolfi)
-**Thursday, July 21, 2011**
-  * Agenda
-    - ReA3 layout (Fernando)
-    - Delay line (Adam/Aimee)
-    - Resistive Micromegas (Wolfi)
-    - Range analysis for hydrogen (Fred)
-    - Correlation between pads of Micromegas (Fabien)
-    - Gas handling system (John)
-    - Spring connector (Bill)
-    - ZAP/Micromegas for Prototype (Wes)
-**Thursday, July 14, 2011**
-  * Agenda
-    - ReA3 layout (Fernando)
-    - Samurai TPC (Rebecca)
-    - CoBo (Nathan/Faisal)
-    - Gas handling system (John)
-    - Correlation between pads of Micromegas (Fabien/Fred)
-**Thursday, July 7, 2011**
-  * Agenda
-    - CoBo (Nathan/Faisal)
-    - Narval (Eugene)
-    - Delay line for the MCP (Adam/Aimee)
-    - Analysis of the hydrogen data / Pad response (Fabien/Fred)
-**Thursday, June 30, 2011**
-  * Agenda
-    - Test of hydrogen (Dany)
-    - Analysis of the hydrogen data (Fabien)
-    - Simulation of the pad responses (Fred)
-    - Narval (Eugene/Fred)
-    - CoBo (Nathan/Faisal/Gilles)
-    - Delay line for the MCP (Adam)
-    - Resistive Micromegas (Aimee)
-**Thursday, June 23, 2011**
-  * Agenda
-    - CoBo/AsAd (Nathan)
-    - uTCA (Faisal)
-    - ND analysis (DS)
-    - Hydrogen test (Dany)
-    - Charge division (Aimee)
-    - Analysis of H2 data (Fred/Fabien)
-**Thursday, June 16, 2011**
-  * Agenda
-    - ND beam monitor / ND analysis (DS)
-    - Hydrogen test (Dany)
-    - Reaction calculation (Adam)
-    - CoBo status (Nathan)
-    - Design of the AT-TPC (Daniel)
-**Thursday, June 9, 2011**
-  * Agenda
-    - ND beam development (DS)
-    - P10 test (Eugene)
-    - MCP (Adam, Aimee)
-    - CoBo status (Nathan)
-**Thursday, June 2, 2011**
-  * Agenda
-    - Test of hydrogen/P10 (Dany)
-    - He+Isobutane/ ND beam development (DS)
-    - MCP (Adam, Aimee)
-    - CoBo status (Faisal)
-**Thursday, May 26, 2011**
-  * Agenda
-    - Preparation for ND fall/ He+Isobutane (DS)
-    - MCP (Adam, Aimee)
-    - AsAd status (Nathan)
-    - CoBo status (Faisal)
-**Thursday, May 19, 2011**
-  * Agenda
-    - Test of hydrogen gas (Eugene, Dany)
-    - Analysis of the Notre Dame data (DS)
-    - MCP (Adam, Aimee)
-    - AsAd status (Nathan)
-    - CoBo status (Faisal)
-    - Gas handling system test (John)
-**Thursday, May 12, 2011**
-  * Agenda
-    - Analysis of the Notre Dame data (DS)
-    - Test of hydrogen gas (Eugene, Dany)
-    - Resistive Micromegas (Wolfi)
-    - MCP (Adam, Aimee)
-    - AsAd status (Nathan)
-**Thursday, May 5, 2011**
-**Thursday, April 28, 2011**
-   * Agenda
-     - Commissioning at Notre Dame(DS)
-**Thursday, March 17, 2011**
-   * Agenda
-     - Schedule of transport(DS)
-     - Upgraded T2K (Eugene)
-     - Reduced CObo (Nathan)
-     - MCP(Adam)
-**Thursday, March 10, 2011**
-   * Agenda
-     - Visit to ND (DS)
-     - Upgraded T2K (Eugene)
-     - Stay at Saclay (Nathan)
-     - MCP(Adam)
-**Thursday, March 3, 2011**
-   * Agenda
-     - Analysis of the wire plane (Lu)
-     - Prototype AT-TPC (DS)
-     - Upgraded T2K (Eugene)
-     - GET (Faisal)
-     - Power Supply (Daniel)
-**Thursday, February 24, 2011**
-   * Agenda
-     - Prototype AT-TPC: Uniformity, time dependence (DS)
-     - Power supply for GET (Eugene)
-     - MCP & beam window foil (Adam)
-     - Visit to Saclay (Nathan)
-     - Gas handling system (John)
-**Thursday, February 17, 2011**
-   * Agenda
-     - ZAP (Mike)
-     - Trigger (Wolfi)
-     - MCP (Adam)
-     - Matsusada Power Supply (Daniel)
-**Thursday, February 10, 2011**
-   * Agenda
-     - The beam line ladder (Mike)
-     - Gas handler (John)
-     - The Prototype AT-TPC (DS)
-     - Reduced Cobo (Nathan)
-     - Upgraded T2K and its support(Eugene)
-     - Cross talk of the PCB (Bill)
-     - Preliminary Project Plan (Daniel)
-**Thursday, February 3, 2011**
-   * Agenda
-     - The Prototype AT-TPC (DS)
-     - Upgraded T2K, grounding of the GET (Eugene)
-     - micro TCA (Faisal, Nathan)
-     - Gas handler (John)
-**Thursday, January 27, 2011**
-   * Agenda
-     - Designing of the AT-TPC (Marius)
-     - The Prototype AT-TPC (DS)
-     - Upgraded T2K, grounding of the GET (Eugene)
-**Friday, January 14, 2011**
-   * Agenda
-     - The Prototype AT-TPC (DS)
-     - Designing of the AT-TPC (Marius)
-     - Designing of the ZAP (Mike)
-     - Status of the Prototype GET (Nathan)
-**Thursday, January 6, 2011**
-   * Agenda
-     - The DAQ, the new T2K (Eugene)
-     - The Prototype AT-TPC (DS)
-     - Designing of the AT-TPC (Marius)
-     - Development of the gas handler (John)
-     - Micro TCA (Faisal)
-     - Status of the Prototype GET (Nathan)
-**Thursday, December 30, 2010**
-**Thursday, December 16, 2010**
-   * Agenda
-     - Update of the Prototype AT-TPC (DS/Eugene)
-     - Commissioning at ND (DS)
-     - New T2K (Eugene)
-     - Status of the stay of Nathan in Bordeaux (Daniel/Faisal)
-**Thursday, December 9, 2010**
-   * Agenda
-     - Update of the Prototype AT-TPC (DS)
-     - DAQ system for the GET (Eugene)
-     - Reduced CoBo update (Faisal)
-**Thursday, December 2, 2010**
-   * Agenda
-     - Update of the Prototype AT-TPC (DS)
-     - Reduced CoBo update (Nathan)
-**Thursday, November 18, 2010**
-   * Agenda
-     - Update of the Prototype AT-TPC (DS)
-     - Design of the AT-TPC (Marius)
-     - Reduced CoBo update (Nathan)
-**Thursday, November 11, 2010**
-   * Agenda
-     - Commissioning at ND (DS)
-     - Reduced CoBo update (Nathan)
-**Thursday, November 4, 2010**
-   * Agenda
-     - Update of testing of the Prototype AT-TPC (DS)
-     - Reduced CoBo update (Nathan)
-     - Design of the Field Cage (Jon)
-**Thursday, October 28, 2010**
-   * Agenda
-     - The cathode power supply issue (DS)
-     - Conditioning of the Micromegas (Mike)
-     - Reduced CoBo update (Nathan)
-     - Testing of the CO2 trap (John/Mike)
-     - Design of the Field Cage (Jon)
-**Thursday, October 21, 2010**
-   * Agenda
-     - Testing of the CO2 trap (Mike)
-     - The control software of power supplies (Eugene)
-     - Assembly of the Prototype AT-TPC (DS/Mike)
-**Friday, October 15, 2010**
-   * Agenda
-     - Report on the visit of CEA-Saclay (Nathan/Eugene)
-**Thursday, October 7, 2010**
-   * Agenda
-     - Assembly of the Prototype AT-TPC (DS)
-**Thursday, September 30, 2010**
-   * Agenda
-     - Micromegas fabrication at Saclay (Mike/Bill)
-     - Progress on assembly of prototype detector (Daisuke)
-**Thursday, September 23, 2010**
-   * Agenda
-     - Cable & remote control of high voltage power supply (Eugene)
-     - Status of fabrication of Micromegas (Daisuke)
-     - Status of hydrogen/deuterium safety (Daisuke)
-     - Status of assembly of Prototype AT-TPC (John/Jon/Daisuke)
-     - Status of testing of the CO2 trap (John)
-     - Reduced CoBo/Prototype GET plan (Nathan)
-**Thursday, September 16, 2010**
-**Thursday, September 9, 2010**
-**Thursday, September 2, 2010**
-**Thursday, August 26, 2010**
-   * Agenda
-     - Progress on prototype fabrication and assembly (Mike)
-     - Cathode voltage feedthru for the AT-TPC (Eugene)
-     - Progress on wire plane tests (Daisuke)
-**Thursday, August 12, 2010**
-**Thursday, August 5, 2010**
-   * Agenda
-     - GET status (Nathan)
-     - Laser calibration system (Justin/Mike)
-     - Gas handling system for the Prototype (DS)
-**Thursday, July 29, 2010**
-   * Agenda
-     - Design of the AT-TPC (Harry)
-     - The status of the analysis of the Micromegas test (Anthony)
-**Thursday, July 22, 2010**
-   * Agenda
-     - Review of the gas handling system of the AT-TPC (John/Ana)
-     - GET power supply / Remote control system (Eugene)
-**Thursday, July 15, 2010**
-   * Agenda
-     - Status of testing of Micromegas (Anthony/Claire)
-     - Status of MCP design (Justin)
-     - Misc. information (DS)
-**Thursday, July 8, 2010**
-   * Agenda
-     - Status of the design of the Prototype (Daisuke)
-     - Status of the new test room (Bill)
-     - Multi-pin connector connection test kit with LED (Mike)
-     - Laser & X-Y table (Mike/Justin)
-     - Misc (Hydrogen gas, Gas handling system review, Power supply)
-**Thursday, July 1, 2010**
-**Thursday, June 24, 2010**
-   * Agenda
-     - review released drawing for the prototype from B. Flight, before sending to J. Ottarson for final design review (Daisuke)
-     - progress on testing of gas mixtures and energy resolution (Claire)
-     - suggestions for organization of test area (Bill)
-     - Announcements (Daniel)
-**Thursday, June 17, 2010**
-   * Agenda
-     - Update of the design of the AT-TPC (Harry)
-     - Status of the test of Micromegas (Claire/Justin/Anthony){{:wm_6-17-2010.pptx| Slides}}
-**Thursday, June 10, 2010**
-   * Agenda
-     - Update of the design of the Prototype AT-TPC (DS)
-**Thursday, June 3, 2010**
-   * Agenda
-     - Status of move to new testing area and test setup (Daisuke){{:wm_6-03-2010_ds.pptx| Slides}}
-     - Discussion of milestone dates for prototype (Daisuke/Daniel)
-     - Status of CoBo development (and other DAQ components?) (Nathan)
-**Thursday, May 27, 2010**
-   * Agenda
-     - New test area organization and progress (Daisuke)
-     - Tests of micromegas - resolution with alpha source (Claire){{:wm_5-27-2010.pptx| Slides}}
-     - Preparation of issues to discuss with Bob Flight at next meeting this coming Friday
-     - Breakdown of AT-TPC project in sub-projects (Daniel)
-**Thursday, May 20, 2010**
-   * Agenda
-     - New test room update
-     - Testing of Micromegas; reduction of negative cross talk {{:wm_5-20-2010.pptx| Slides}}
-     - ANSYS for studying mechanical characteristics of the AT-TPC
-     - Design of Prototype AT-TPC at Rochester
-**Thursday, May 13, 2010**
-   * Agenda
-     - Testing of micromegas in test chamber {{:wm_5-13-2010_ds.pptx| Slides}}
-     - Status of clean room and its infrastructure
-     - Status of connector board prototype
-     - Prototype design at Rochester / organization of follow-up weekly meetings
-     - Possibility of collaboration with Lawrence Livermore National Laboratory
-**Thursday, May 6, 2010**
-   * Agenda
-     - Status of clean room and schedule of move to new testing/assembly area {{:wm_5-06-2010_ds.pptx| Slides}}
-     - Micromegas tests: status and issues
-     - Discussion about a laser calibration system {{:wm_5-06-2010_hm_lasercalibration.pptx| Slides}}
-     - Gas handling system design status (feedback on work order, path forward)
-**Thursday, April 29, 2010**
-   * Agenda
-     - Status of clean room (Daisuke){{:wm_4-29-2010_ds.pptx| Slides}}
-     - Test of micromegas with new connectors (Mike/Daisuke)
-     - Concept drawing for TPC angle mechanism (Harry)
-**Thursday, April 22, 2010**
-   * Agenda
-     - Design of prototype in Rochester (Daisuke)
-     - Gas handling system design (Fernando/Ana)
-     - Clean room construction (Daniel/Daisuke)
-     - Connector assembly prototype (Mike)
-     - Discussion about items that should be procured ASAP (Bill)
-     - Miscellaneous
-**Thursday, April 15, 2010**
-**Thursday, April 8, 2010**
-  * {{:wm_4-08-2010_minute.docx|Minute}}
-  * Agenda
-    - The status of the CoBo (NU) [[https://project-actar-get.cea.fr/Groups/100_todolist/400_wp4_data_acquisi/slides_-_presentatio/workgroup_contents| Slides]]
-    - The individual bias circuit and the insertion test kit of the Micromegas (MF)
-**Thursday, April 1, 2010**
-  * {{:wm_4-01-2010_minute.docx|Minute}}
-  * Agenda
-    - Micromegas design submission (MF) {{:wm_4-01-2010_mf_micromegas.pptx| Slides}}
-    - Test field cage (WM)
-    - Status of the project management (DS) {{:wm_4-01-2010_ds.pptx| Slides}}
-    - Forthcoming events (WM)
-**Thursday, March 25, 2010**
-  * {{:wm_3-25-2010_minute.docx|Minute}}
-  * Agenda
-    - Capacitance measurement of Micromegas (MF) {{:wm_3-25-2010_micromegas_capa_mf.pptx| Slides}}
-    - Status of the Prototype design (WM/DS)
-**Thursday, March 18, 2010**
-  * {{:wm_3-18-2010_minute.docx|Minute}}
-  * Agenda
-    - Electric field simulation (FM) {{:wm_3-18-2010_fm_garfield.ps| Simulation result}}
-    - Filed cage design (DS) {{:wm_3-18-2010_dsx.pdf| Slides}}
-    - ZAP design (WL)  [[https://project-actar-get.cea.fr/Groups/100_todolist/200_wp2_front_end_el/zap/slides-presentation/protection_unit_pres6362/view| ZAP circuit design]]     {{:zap_integration_at-tpc_2010-3-15_x.pdf|ZAP integration}}
-    - Micromegas capacitance (WM)
-    - Purchasing of a scroll pump (FM/DS)