venting_pumping_intermediate_image_box
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision | |||
|
venting_pumping_intermediate_image_box [2024/09/26 08:50] pereira [Evacuating the Chamber] |
venting_pumping_intermediate_image_box [2025/12/01 12:36] (current) pereira [Venting the Chamber] |
||
|---|---|---|---|
| Line 31: | Line 31: | ||
| - Valves #1-5 should be closed and valve #6 should remain open. From this state click **VENT** and then **PUMP** to enter pump mode and leave the system in this state until it is ready to be filled. | - Valves #1-5 should be closed and valve #6 should remain open. From this state click **VENT** and then **PUMP** to enter pump mode and leave the system in this state until it is ready to be filled. | ||
| ===== Venting the Chamber ===== | ===== Venting the Chamber ===== | ||
| + | Notify Control Room and Vacuum Groups that the chamber will be vented | ||
| From the S800 Main Vacuum page, go to the Intermediate Image - RBT_BTS32 D2430 Pumping Station page, and ensure | From the S800 Main Vacuum page, go to the Intermediate Image - RBT_BTS32 D2430 Pumping Station page, and ensure | ||
venting_pumping_intermediate_image_box.1727355044.txt.gz · Last modified: 2024/09/26 08:50 by pereira
Page Tools
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Noncommercial-Share Alike 4.0 International
