Differences

This shows you the differences between two versions of the page.

--- nmr_probes [2024/01/18 13:55]
swartzj [NMR reading sometimes takes too long (> 30 min)]
+++ nmr_probes [2024/06/01 16:35] (current)
swartzj
@@ Line 1: / Line 1: @@
 ====== NMR Control =====
-Two digital oscilloscopes are dedicated to NMR readout – one for the analysis line NMRs and one for the spectrograph NMRs. The scopes are located in the S3 mezzanine. They are isolated from clean ground because this signals from the NMR probes are on a dirty ground.
+Two digital oscilloscopes are dedicated to NMR readout – one for the analysis line NMRs and one for the spectrograph NMRs. The scopes are located in the S3 mezzanine. They are isolated from clean ground because the signals from the NMR probes are on a dirty ground.
 ===== Motivation =====
@@ Line 113: / Line 113: @@
 ==== Error message: "/srv/s3/nmr-logs/spectrograph.log is not accessible" ====
-  * In a new terminal, ssh to yourname@exp-s3-nmr, and issue:
+  * In a new terminal, ssh to yourname@exp-s3-nmr, then go to /srv/s3/nmr-logs/ and issue:
-  * mv spectrograph.log spectrograph.yourname.log
+  * mv spectrograph.log spectrograph-yourname.log
   * Now close the error message window and you should not have this problem anymore.

S800 Documentation