Differences

This shows you the differences between two versions of the page.

magnetic-rigidity_setting [2023/09/22 11:21] swartzj		magnetic-rigidity_setting [2023/09/22 11:25] (current) swartzj
Both sides previous revision Previous revision Next revision		Previous revision
Line 18:		Line 18:


-	We strongly recommend Barney printouts after every change of the spectrograph. This not only provides a paper copy of all magnet settings from segment 0 to segment 8 but also saves this information in ascii format on disk (accessible via the A1900 web site under [[https://groups.nscl.msu.edu/a1900/archive/barney/\|Beam Line Savesets]]). If an [[Determination of Angles and Momentum#Calculation of the inverse map\|inverse map]] is desired for the tracking of the particles in the spectrograph, BTS34 Brho and the magnet currents of the dipoles and quadrupoles are needed to determine important input parameters for the calculation.	+	We strongly recommend producing savesets (formerly known as Barney printouts) after every change of the spectrograph. This not only provides a paper copy of all magnet settings from segment 0 to segment 8 but also saves this information in ascii format on disk (accessible via the A1900 web site under [[https://groups.nscl.msu.edu/a1900/archive/barney/\|Beam Line Savesets]]). If an [[Determination of Angles and Momentum#Calculation of the inverse map\|inverse map]] is desired for the tracking of the particles in the spectrograph, BTS34 Brho and the magnet currents of the dipoles and quadrupoles are needed to determine important input parameters for the calculation.

S800 Documentation

User Tools

Site Tools

Differences

Page Tools