Differences

This shows you the differences between two versions of the page.

--- hv_bias [2023/10/12 09:10]
noji Updated after the migration from DAQ to EXP network
+++ hv_bias [2023/10/17 09:40] (current)
noji
@@ Line 7: / Line 7: @@
 {{:wiki:phoebus_diag_hv.png|CS-Studio Phoebus DIAG HV control}}
-This page can be reached from “FRIB EXP” → “DIAG” (Engineering Area, not to be confused with “S800” → “Diag Main”) → “S800 HV Bias Power Supply”.
+This “S800 HV Bias Power Supply” page is linked from both "S800" and “DIAG” launchers, a screenshot of the former of which is shown below.
+{{:wiki:css_s800launcher_hv.png|}}
+The ramp rate can be changed in the "Details". ISEG cards that are used here have only one ramp rate per bank of channels, so changing the rate for one channels will change the rate for all the others in the same bank. When you ramp the HV, ensure that the ramp rate is set properly.
 Each channel can also be accessed from by going to “FRIB EXP” -> “Power Supplies” and open the “EXP-S3” tab, which looks like the screenshot below.

S800 Documentation