Differences

This shows you the differences between two versions of the page.

--- electronics [2023/05/08 18:08]
swartzj
+++ electronics [2024/09/25 13:16] (current)
pereira [Firmware Schematics]
@@ Line 8: / Line 8: @@
   * [[Timing|Timing modules]]
   * [[XLM Delay|XLM Delay module]]
+  * [[HV bias]]
 ===== Crate Configuration =====
-Most of the S800 electronics is installed in two racks inside the cabinet seating on the top level of the S3 vault, right in the north side of the [[Stations#Focal Plane Station|focal plane station chamber]] (see picture below). There is a total of six crates mounted in the two racks. The left rack contains a [[Electronics#CAMAC crate]] on the top and two NIM crates, [[Electronics#NIM crate 1]] on the middle and [[Electronics#NIM crate 2]] on the bottom. The right rack includes a [[Electronics#VME crate]] on the top, [[Electronics#NIM crate 3]] on the middle  and [[Electronics#NIM crate 4]] on the bottom. A schematic representation of the modules housed within these racks in May 2023 compared to August 2017 can be found here:
+Most of the S800 electronics is installed in two racks inside the cabinet seating on the top level of the S3 vault, right in the north side of the [[Stations#Focal Plane Station|focal plane station chamber]] (see picture below). There is a total of six crates mounted in the two racks. The left rack contains a [[Electronics#CAMAC crate]] on the top and two NIM crates, [[Electronics#NIM crate 1]] on the middle and [[Electronics#NIM crate 2]] on the bottom. The right rack includes a [[Electronics#VME crate]] on the top, [[Electronics#NIM crate 3]] on the middle  and [[Electronics#NIM crate 4]] on the bottom. For an overview of the modules installed and their positions in the S800 crates, as at 16 May 2023, see the tables in the pdf that is linked to here:
-{{:wiki:modules_in_s800_crates.pdf||The modules in the S800 racks in 2023 vs 2017.}}
+{{ :wiki:modules_in_s800_crates-may2023.pdf |The modules in the S800 crates, updated 16 May 2023}}
@@ Line 58: / Line 59: @@
 ===== Firmware Schematics =====
-  * {{:wiki:Usbtrig.pdf|Trigger module firmware (ULM LeCroy 2367 )}}
+Schematics of the trigger, time-stamping, and CRDC firmware are available in S800 document folders (contact [[pereira@frib.msu.edu]]).
-  * {{:wiki:Stamp64.pdf|Time stamping firmware (XLM72)}}
-  * {{:wiki:Crdc5v.pdf|CRDC readout firmware (XLM72V)}}
 ===== Documentation =====
@@ Line 85: / Line 86: @@
       * {{:wiki:Manual_Canberra_HV_3002D.pdf|Manual for the HV Power Supply Canberra 3002D module}}
       * {{:wiki:n568b_n568lc_rev4.pdf|Manual for N568B CAEN Spectroscopic amplifer}}
+      * {{:wiki:t122nl.pdf|Manual for EG&G/Ortec T122/NL Quad Updating Discriminator}}

S800 Documentation

User Tools

Site Tools

Differences

Page Tools