Differences

This shows you the differences between two versions of the page.

--- electronics [2016/07/21 20:55]
pereira [Electronic Diagrams]
+++ electronics [2024/09/25 13:16] (current)
pereira [Firmware Schematics]
@@ Line 2: / Line 2: @@
   * [[Electronics#Crate Configuration|Crate Configuration]]
-  * [[Electronics#Inventory Modules|Inventory Modules]]
   * [[Electronics#Electronic Diagrams|Electronic Diagrams]]
+  * [[Electronics#Firmware Schematics|Firmware Schematics]]
   * [[Electronics#Documentation|Electronic Manuals]]
   * [[Trigger|ULM Trigger module]]
   * [[Timing|Timing modules]]
   * [[XLM Delay|XLM Delay module]]
+  * [[HV bias]]
 ===== Crate Configuration =====
-Most of the S800 electronics is installed in two racks inside the cabinet seating on the top level of the S3 vault, right in the north side of the [[Stations#Focal Plane Station|focal plane station chamber]] (see picture below). There is a total of six crates mounted in the two racks. The left rack contains a [[Electronics#CAMAC crate]] on the top and two NIM crates, [[Electronics#NIM crate 1]] on the middle and [[Electronics#NIM crate 2]] on the bottom. The right rack includes a [[Electronics#VME crate]] on the top, [[Electronics#NIM crate 3]] on the middle  and [[Electronics#NIM crate 4]] on the bottom.
+Most of the S800 electronics is installed in two racks inside the cabinet seating on the top level of the S3 vault, right in the north side of the [[Stations#Focal Plane Station|focal plane station chamber]] (see picture below). There is a total of six crates mounted in the two racks. The left rack contains a [[Electronics#CAMAC crate]] on the top and two NIM crates, [[Electronics#NIM crate 1]] on the middle and [[Electronics#NIM crate 2]] on the bottom. The right rack includes a [[Electronics#VME crate]] on the top, [[Electronics#NIM crate 3]] on the middle  and [[Electronics#NIM crate 4]] on the bottom. For an overview of the modules installed and their positions in the S800 crates, as at 16 May 2023, see the tables in the pdf that is linked to here:
+{{ :wiki:modules_in_s800_crates-may2023.pdf |The modules in the S800 crates, updated 16 May 2023}}
@@ Line 46: / Line 47: @@
-===== Inventory Modules =====
-In progress.
 ===== Electronic Diagrams =====
-  * {{:wiki:s800electronicstschematics-to20160720.pdf|Main Electronic Diagram}}
+  * {{:wiki:s800electronicstschematics.pdf|Main Electronic Diagram}}
   * {{:wiki:crdcdiagram.pdf|CRDC Schematic Electronic Diagram}}
   * {{:wiki:ionchamber.pdf|Ion Chamber Schematic Electronics Diagram}}
@@ Line 58: / Line 57: @@
   * {{:wiki:fasttimimg.pdf|Fast Timing Schematic Electronics Diagram}}
+===== Firmware Schematics =====
+Schematics of the trigger, time-stamping, and CRDC firmware are available in S800 document folders (contact [[pereira@frib.msu.edu]]).
@@ Line 83: / Line 85: @@
       * {{:wiki:Manual_Ortec_TAC_566.pdf|Manual for the TAC ORTEC 566 module}}
       * {{:wiki:Manual_Canberra_HV_3002D.pdf|Manual for the HV Power Supply Canberra 3002D module}}
-  * Firmware FPGA Schematics
+      * {{:wiki:n568b_n568lc_rev4.pdf|Manual for N568B CAEN Spectroscopic amplifer}}
-      * {{:wiki:Usbtrig.pdf|Trigger module firmware (ULM LeCroy 2367 )}}
+      * {{:wiki:t122nl.pdf|Manual for EG&G/Ortec T122/NL Quad Updating Discriminator}}
-      * {{:wiki:Stamp64.pdf|Time stamping firmware (XLM72)}}
-      * {{:wiki:Crdc5v.pdf|CRDC readout firmware (XLM72V)}}

S800 Documentation

User Tools

Site Tools

Differences

Page Tools