Differences

This shows you the differences between two versions of the page.

--- camera_is_not_working [2024/01/26 11:17]
swartzj created
+++ camera_is_not_working [2024/01/29 11:26] (current)
swartzj
@@ Line 5: / Line 5: @@
 If you encounter this:
-- First check that the exposure time is not set to be too long.
+* First check that the exposure time is not set to be too long.
-- At the bottom-right of the camera control screen, go to the drop-down menu called "Expert (AD detail)" and select "AD Base Screen".
-- In the right-most column, press the button called "Reset camera".
+* At the bottom-right of the camera control screen, go to the drop-down menu called "Expert (AD detail)" and select "AD Base Screen".
-- Make sure that "Exposure auto" (in middle column) and "Gain auto" (in right-most column) are set to OFF. These fields are set to ON after the camera was unplugged and replugged, but you may want to be able to modify these parameters.
+* In the right-most column, press the button called "Reset camera".
+* Make sure that "Exposure auto" (in middle column) and "Gain auto" (in right-most column) are set to OFF (not to continuous or ON). These fields are set to ON after the camera was unplugged and replugged, but you may want to be able to modify these parameters.
+* Set Pixel format to Mono16.
+* Recommended values (exp. time, gain) = (0.05, 4).

S800 Documentation